AI surrogate models for CFD

Turn your Fluent simulations into a surrogate model that answers in under a second.

A full 3D Fluent run takes hours. A quote, a design review or an operating decision needs hundreds of answers by tomorrow. We validate your case, run the training simulations with PyFluent on our cluster, and hand you a trained model that predicts pressure drop, temperatures and forces for designs nobody has simulated yet.

  • Trained on validated Fluent runs
  • You own the model and its code
  • Using the model needs no Fluent licence
  • 15+ years of Ansys Fluent projects

Prediction console

Shell-and-tube heat exchanger, shell side

Example
↑ Baffle spacing Low High Flow rate →

Pressure drop

12.0 kPa

Outlet temperature

32.2 °C

This prediction (in your browser)
< 0.1 ms
The same question as a full Fluent run
hours

Illustration only: a simple formula running in your browser, not a trained model. Yours is trained on your own validated Fluent runs and comes with its measured error.

Where the hours go

One Fluent run answers one question. Your business asks hundreds.

Every new question waits in the same queue: geometry, mesh, setup, solve, and an engineer to read the result. These are the questions that wait longest.

A customer wants a quote on a custom heat exchanger.

With Fluent alone

An engineer sets up and solves a case before sales can answer.

With a surrogate model

The sales engineer types the sizes and reads the pressure drop and outlet temperature.

A design review wants to compare 40 variants of a fan blade.

With Fluent alone

40 cases to set up, solve and post-process.

With a surrogate model

40 predictions in under a minute, then Fluent confirms the best three.

An operator needs to know what happens if inlet flow drops by 20%.

With Fluent alone

A request to the simulation team, and a wait.

With a surrogate model

An answer on the operator's screen while the decision is still open.

R&D wants the best of 10,000 possible geometries.

With Fluent alone

Running them all would take years of solver time.

With a surrogate model

An optimizer searches all 10,000 on the model and sends the finalists to Fluent.

Fluent stays in the loop: the model answers the routine questions, and full runs check the cases that decide something.

What a surrogate model is

A fast stand-in for your simulation, trained on your own Fluent results

A surrogate model, also called a metamodel or response surface, is a machine learning model that learns how your simulation's outputs respond to its inputs. We run a planned set of Fluent cases across the ranges you care about, collect the results, and train the model on them. Once trained, it predicts a new case in a fraction of a second.

It's only as good as the runs behind it. Inside the trained ranges, we measure its error against Fluent runs it never saw and give you the number. Outside them, its answers can't be trusted, and the validation report says where that line is.

  1. 1

    Inputs you choose

    flow rates, sizes, angles, temperatures

  2. 2

    Planned Fluent runs

    one validated setup, every run checked

  3. 3

    Trained model

    error measured on runs it never saw

  4. 4

    Predicted outputs

    pressure drop, heat transfer, forces, uniformity

Three terms that get mixed up

Surrogate model
Learns the link from inputs to outputs out of simulation results. Fast to evaluate, valid inside the ranges it was trained on.
Reduced-order model (ROM)
Compresses a full flow field into a few dominant patterns, so it can rebuild whole contour plots instead of single values.
Digital twin
A model kept in step with a real machine through its sensor data. A surrogate or a ROM is often the fast engine inside one.

How a model is built

You approve the scope and the validated baseline before a single training run starts

Automation multiplies whatever it's given. A wrong setup run 500 times gives 500 wrong answers, so we validate first and automate second.

  1. 01

    Scope

    We agree the inputs, their ranges, the outputs the model must predict and the accuracy you need. You get a fixed quote.

    You approve: inputs, ranges, outputs

  2. 02

    Validated baseline

    One Fluent case is set up, put through a mesh independence study and checked against your test data, a published result or your own simulation.

    You approve: the validation plot

  3. 03

    Design of experiments

    We plan which cases to run so they cover the design space evenly. A common starting point is ten runs per input, with more added where the model is still unsure.

    You see: the run plan

  4. 04

    Automated Fluent campaign

    PyFluent sets up and solves every case the same way on our 512-core cluster. Each run's convergence is checked, and runs that fail are fixed or dropped before they reach the training data.

    You see: the run log

  5. 05

    Training and testing

    We fit and compare model types, such as Gaussian processes, gradient boosting and neural networks, and hold back runs the model never sees. Its error on those runs is the accuracy we report.

    You get: the measured error, per output

  6. 06

    Delivery

    The model arrives as a Python package, a desktop tool or a web app, with documented code and a walkthrough session. Questions and extensions after delivery are part of the job.

    You get: the model, the code, the data

What we can build

Six things we build on top of a validated Fluent case

Most projects combine two or three. A surrogate model starts with an automated Fluent workflow, and optimization usually runs on a surrogate.

01 Surrogate model

You get

A trained model that predicts your outputs from your inputs in under a second.

Useful when

You need hundreds of answers across a known design range.

Fluent needed to use it?

No

02 Instant-result tool

You get

A surrogate behind a simple form or web page, for people who don't run CFD.

Useful when

Sales, quoting or operations need answers without waiting for engineering.

Fluent needed to use it?

No

03 Design optimization

You get

An algorithm searches your design space for the best design against your targets and manufacturing limits, for one objective or several.

Useful when

You know what "better" means, such as lower pressure drop or more uniform flow, but not which design gets there.

Fluent needed to use it?

Only to confirm the winners

04 Automated Fluent workflow

You get

Your recurring simulation as one command: geometry import, meshing, setup, solve and a standard report.

Useful when

The same kind of case comes back every week and is set up by hand each time.

Fluent needed to use it?

Yes

05 Parametric and DOE studies

You get

Sensitivity studies, parameter sweeps and what-if scenarios, run from a table and compared in one report.

Useful when

You need to know which parameters matter before you design around them.

Fluent needed to use it?

No, you receive the results

06 Custom simulation engine

You get

An in-house tool where engineers enter dimensions and operating conditions, and Fluent meshes, solves and reports in the background.

Useful when

Several engineers run the same validated model, and not all of them are Fluent experts.

Fluent needed to use it?

Yes

Where surrogates pay off

Products that come in many sizes and run across many conditions

Each card shows what goes into the model and what comes out. We also work on energy and biomedical devices.

HVAC and data centers

Data hall cooling

Inputs
Rack heat loads, cooling unit supply temperature, floor tile layout
Outputs
Rack inlet temperatures, hot spots

Heat transfer equipment

Heat exchanger families

Inputs
Shell size, tube count, baffle spacing, flow rates
Outputs
Pressure drop, outlet temperatures, duty

Oil, gas and process

Valve and pump ranges

Inputs
Size, opening, flow rate, fluid properties
Outputs
Flow coefficient, pressure loss, cavitation risk

Turbomachinery

Fan and blower series

Inputs
Blade angle, tip clearance, rotational speed
Outputs
Pressure rise, efficiency, shaft power

Process equipment

Mixing tanks and reactors

Inputs
Impeller type and speed, fill level, viscosity
Outputs
Mixing time, power draw, dead zones

Automotive and marine

Vehicle and hull shapes

Inputs
Shape parameters, speed, ride height or trim
Outputs
Drag, lift, resistance
Example project

A quoting tool for custom heat exchangers

A manufacturer quotes custom heat exchangers, and every quote needs a thermal check that waits for an engineer. We validate one Fluent model of the product family, run a few hundred cases across its sizes and flow rates, and train a surrogate on them. Sales engineers get a form that returns pressure drop and outlet temperature in seconds. Full simulations stay for the orders that get signed.

  1. 01 One validated Fluent model
  2. 02 A few hundred planned runs
  3. 03 A trained surrogate, error measured
  4. 04 A quoting form for sales

This shows how a typical project runs. It isn't a named client's result.

Platform or partner

AI simulation platforms need training data. We produce it.

Several software platforms train AI models on simulation results. They work well for teams that already have hundreds of clean, consistent runs and the engineers to produce more. Most teams have a handful of cases, set up by different people over several years.

An AI simulation platform

Training data
Yours to produce and clean
CFD judgement
Your team's
What you pay for
A software licence
Where the model lives
Inside the platform you license

MR CFD

Training data
We run it: one validated setup, convergence checked on every run
CFD judgement
Ours, from 15+ years of Ansys Fluent projects
What you pay for
One project at a fixed price
Where the model lives
In your own repository, as documented Python code

Already using a platform? We can produce validated Fluent training runs for it.

What you receive

Everything needed to run, check and extend the model without us

  • A walkthrough session, and training for your engineers if they'll maintain it
  • Support after delivery for questions, changes and new runs
  • We sign an NDA before any file moves. Your geometry and results stay on storage only the assigned engineers can read.

your-model/

├── model/ The trained model and its documented Python source code
├── data/ The training data set: every run's inputs and outputs
├── fluent/ The validated Fluent baseline case and the PyFluent scripts that ran the campaign
└── report/ A validation report: the error per output on held-back runs, and the ranges the model is valid in

Cost and timing

A fixed price after a free feasibility check

We don't list a price, because two projects rarely cost the same. After the feasibility check you get a fixed quote and a timeline, and if the scope changes, we requote before we charge.

Number of inputs
More inputs need more training runs to cover the design space.
Cost of one Fluent run
A steady 2D case solves in minutes. A transient 3D multiphase case can take many hours.
Accuracy you need
Tighter error targets need denser sampling where it matters.
Delivery format
A Python package is the simplest. A desktop tool or web app adds interface work.

Feasibility in 24 to 48 hours

We read your brief, estimate how many runs the model needs, and tell you honestly if a surrogate is the right tool.

Get a free feasibility check

Questions

What engineering teams ask before they start

Free feasibility check

Tell us what the model should predict

A few lines are enough. A senior CFD engineer reads them and replies within 24 to 48 hours with what's possible, roughly how many Fluent runs it takes, and a fixed price.

Worth including

  • The product or equipment
  • The inputs that change, with their ranges
  • The outputs you need to predict
  • Files or results you already have

Rather talk first?

Working on a thesis or a paper? Our CFD Consulting page covers research projects

Your name
Work email
Company
WhatsApp number We follow up on WhatsApp, so please give a number that has it.
What do you want to end up with?
A surrogate model
An instant-result tool for non-CFD staff
Design optimization
An automated Fluent workflow
A parametric or DOE study
A custom simulation engine
Not sure yet
What do you have today?
A Fluent model we trust
Simulation or test results
Geometry and operating data, no CFD yet
Not sure
What should the model predict?

Your details stay between you and our engineers. NDA on request.

AI surrogate models for CFD

How many Fluent runs would your model need?

Send us the inputs and outputs in a few lines. We'll reply with an estimate and a fixed price, free.

Ask for the estimate

© 2011 - MR CFD LLC. All Rights Reserved.

Select your Language
You can change it anytime from the bottom of the page.
No results found
English
Español
العربية
Türkçe

AI Assistant

Ask me anything about MR CFD

How can I help?

Ask away, I'll point you the right way.

What I can do on this page

AI can make mistakes. Check important answers.