Engineering Fields Online Courses
Here's every CFD online course related to Engineering Fields category.
Price: $29
Heat Transfer: Beginner CFD Training Package is a ten-project journey through the fundamentals of thermal simulation in ANSYS Fluent. Starting from everyday natural-convection problems and building toward radiation, buoyancy-driven ventilation, and advanced turbine film cooling, it gives newcomers a hands-on, application-driven foundation in conduction, convection, and radiation modeling — one real engineering case at a time.
Price: $39
Mechanical Engineering: Beginner CFD Training Package is a ten-project introduction to the core methods and applications of CFD in ANSYS Fluent. Moving from single-phase aerodynamics through compressible flow, mesh morphing, particle tracking, and multiphase modeling, it gives newcomers a hands-on, application-driven foundation in the techniques that underpin mechanical-engineering simulation — one real engineering case at a time.
Price: $29
HVAC Engineering: Beginner CFD Training Package is a ten-project introduction to airflow, ventilation, and thermal comfort simulation in ANSYS Fluent. Starting from a single heated room and progressing through natural, passive, and mechanical ventilation strategies to full building-scale spaces, it gives newcomers a hands-on, application-driven foundation in the CFD techniques behind modern heating, cooling, and ventilation design — one real engineering case at a time.
Horizontal Fluidized Bed Dryer, ANSYS Fluent CFD Simulation
Intermediate, Advanced
Price: $28
In this project, the evaporation of soil moisture in a fluidized bed was simulated using ANSYS Fluent. The geometry was created in SpaceClaim, and a mesh consisting of 22,000 elements was generated using ANSYS Meshing. The Eulerian model was chosen to simulate multiphase flow, and the species transport model was used to define the mixture in each phase. Evaporation was modeled using the evaporation-condensation method based on the Lee
Taxi Drone, Ansys Fluent Simulation
Intermediate
Price: $319
Taxi Drone Ansys Fluent Simulation involves using advanced CFD software to analyze the aerodynamic performance of urban air mobility vehicles The geometry of the taxi drone was designed using ANSYS SpaceClaim , The mesh was generated using ANSYS Meshing, resulting in a total of 2,829,977 elements The velocity inlet was set to 30 m/s with an angle of attack of 5 degrees. The rotational speed of the blades was configured with MRF method at 5000 RPM, with the upper and lower blades rotating in opposite directions.
Price: $56
This study investigates the aerodynamic performance of a turbine vane using CFD simulations with two different turbulence models The simulations were conducted using ANSYS Fluent, comparing the k-Omega SST and Large Eddy Simulation (LES) turbulence models The geometry of the turbine vane was created using ANSYS Design Modeler. The computational domain was then discretized using ANSYS Meshing, resulting in a high-resolution structured mesh of 12,634,415 elements
Switchblade 300 Drone, Transient Ansys Fluent CFD Simulation
Intermediate, Advanced
Price: $20
This report discusses the CFD simulation conducted for the Switchblade 300 using ANSYS Fluent software The geometry of the Switchblade 300 was created using SpaceClaim Initially, Using ANSYS Meshing, a non-conformal mesh with approximately 40 million tetrahedral cells was generated, after that We decided to change the mesh type to polyhedral in Ansys fluent to decrease the number of mesh elements from 40,000,000 to 7,000,000 The setup included a velocity inlet of 28.05 m/s, an angle of attack of 5 degrees, and a rotational speed of 5000 RPM
Coal Gasification in Bubbling Fluidized Bed (BFB) Gasifier CFD Simulation
Intermediate, Advanced
Price: $120
In this project, we are simulating the bubbling fluidized bed (BFB), a type of fluidized bed reactor where solid particles are suspended and agitated by the upward flow of gas The design and operation of BFBs allow for better control of temperature and reaction conditions, leading to improved efficiency and product quality in industrial processes The 2D geometry of the BFB is designed using Design Modeler software. Then, it is meshed in ANSYS Meshing. In total 26800 cells are generated. To model BFB, two Eulerian phases are defined by the Eulerian multiphase model.
Price: $14
This product uses ANSYS Fluent software to investigates the effect of thermocapillary convection on the melting and deforming processes of a Phase Change Material (PCM) subjected to local heating The VOF method tracks the deformable liquid-gas interface Thermocapillary convection is modeled by including a volumetric source term in the momentum equation Enthalpy-Porosity Method models the melting process The geometry is designed using SpaceClaim, and the meshing is performed using Ansys Meshing, with 47,500 cells.