VOF Online Courses
Here's every CFD online course related to VOF category.
Price: $240
This study investigates bubble dynamics in a 2D boiling chamber using CFD analysis in ANSYS Fluent. The 2D geometry was created in ANSYS Design Modeler and meshed using ANSYS Meshing, resulting in a structured mesh. The simulation utilizes the Volume of Fluid (VOF) multiphase model coupled with an evaporation-condensation model for phase change. A User-Defined Function (UDF) initializes a sinusoidal air layer at the chamber bottom. The transient simulation examines bubble formation, growth, rise, and detachment over multiple time steps, visualized through volume fraction contours.
Price: $100
This problem simulates Cooling of two parallel cylindrical micro-tubes using Ansys Fluent software. The 2-D geometry is designed in Design Modeler software. ANSYS Meshing software is used to generate the mesh; the element number equals 40,613. In this project, the Cooling by water flow is simulated using the VOF How water flows and reduces the temperature of the tube wall, in this project is well modeled.
Bubble Trap CFD Simulation, ANSYS Fluent
Intermediate, Advanced
Price: $16
This project numerically simulates the Bubble Trap using ANSYS Fluent software. The 2-D geometry is designed in Spaceclaim software. We used ANSYS Meshing Software to generate mesh; the element number equals 32,000 . The multiphase VoF model simulates the two-phase flow of water and air.
Price: $8
In this project, air-water mixing improvement using rings is simulated by ANSYS Fluent software. The geometry is designed in Design Modeler then meshed in ANSYS Meshing generating 6,342,465 cells. VoF model is activated to simulate mixing the two phases. The turbulence of the flow is simulated by Standard k-e model.
Hydraulic Jump Investigation in Stepped Structures, ANSYS Fluent
Beginner, Intermediate
Price: $10
⦁ This problem simulates Hydraulic Jump Investigation in Stepped Structures, using Ansys Fluent software. ⦁ The 2-D geometry is designed in Design Modeler software. ⦁ ANSYS Meshing software is used to generate the mesh; the element number equals 76,048. ⦁ In this project, the Formation of hydraulic jump is simulated using the VoF model. ⦁ Flow energy loss in this project is well modeled.
Price: $48
⦁ This problem simulates Bubble Columns Reactor using the VOF model in Ansys Fluent software. ⦁ The 2-D geometry is designed in Design Modeler software. ⦁ ANSYS Meshing software is used to generate the mesh; the element number equals 93,687. ⦁ In this project, the rising of air bubbles is simulated using the VOF model.
Price: $60
The present problem simulates the aeroacoustics and sound generation by a water flow inside a Francis Turbine using ANSYS Fluent software. We have designed the geometry using ANSYS Design Modeler software and created the mesh on this geometry using ANSYS Meshing software. The mesh type is unstructured with 4,914,404cells. We use the Frame Motion (MRF) to define rotation movement. The Broadband Noise Sources model is also used to define the acoustic model
Price: $20
The problem numerically simulates Hydro-Kinetic turbine using ANSYS Fluent software. We design the 3-D model with the Solidworks software. We mesh the model with ANSYS Meshing software, and the element number equals 7,758,370. The Mesh Motion (Sliding Mesh) technique is used to simulate the rotation of the turbine blades The VOF method is used In this simulation.
Price: $20
In this project, we have simulated the performance of a Porous Media Reactor Tube with the presence of catalyst using ANSYS Fluent software. Three-dimensional modeling was done using Design Modeler software. The meshing of the model has been done using ANSYS Meshing software and the element number equals 4,255,042 . To simulate the behavior of molten salt and reactor inlet flow, the multiphase VOF Eulerian model is utilized. The porous media model is employed to impact the flow inside the reactor. For the reactions, the species transport model with two reactions is used.