Darrieus Turbine Training Package

Price: $189

The Darrieus Turbine Training Package is a focused 5-project path for engineers, researchers, and students working on vertical axis turbines in ANSYS Fluent. It covers transient sliding-mesh simulation of a Darrieus wind turbine, validation of power coefficient results against a published paper, self-starting rotor motion driven by aerodynamic torque using the 6DOF solver, a comparison of serrated and plain airfoil blades for vortex control and performance, and the use of the Darrieus concept as a vertical axis water turbine for hydrokinetic energy. The package delivers over 1.5 hours of step-by-step video with English audio and draws on 15 years of MR CFD expertise. For horizontal axis designs, see the HAWT: Wind Turbine Training Package.

Audio: English
Subtitles: English, Spanish, Arabic, Turkish, French, Portuguese
Latest Lesson in This Course

Added Oct 18, 2026

Darrieus Vertical Axis Water Turbine, Dynamic Mesh, ANSYS Fluent Training

Beginner, Intermediate, Advanced
5 Lessons
1h 33m 13s
  • 0% Complete
  • Wind Turbine

    Darrieus Turbine Training Package

    Price: $189

    The Darrieus Turbine Training Package is a focused 5-project path for engineers, researchers, and students working on vertical axis turbines in ANSYS Fluent. It covers transient sliding-mesh simulation of a Darrieus wind turbine, validation of power coefficient results against a published paper, self-starting rotor motion driven by aerodynamic torque using the 6DOF solver, a comparison of serrated and plain airfoil blades for vortex control and performance, and the use of the Darrieus concept as a vertical axis water turbine for hydrokinetic energy. The package delivers over 1.5 hours of step-by-step video with English audio and draws on 15 years of MR CFD expertise. For horizontal axis designs, see the HAWT: Wind Turbine Training Package.

    Audio: English
    Subtitles: English, Spanish, Arabic, Turkish, French, Portuguese
    Beginner, Intermediate, Advanced
    5 Lessons
    1h 33m 13s
    Latest Lesson in This Course

    Added Oct 18, 2026

    Darrieus Vertical Axis Water Turbine, Dynamic Mesh, ANSYS Fluent Training

    Buying this course gives you full access to every course listed below.
    1. Serrated Vs. Plain Airfoil: Darrieus VAWT

      Serrated Vs. Plain Airfoil: Darrieus VAWT

      1 Lesson
    2. Darrieus Wind Turbine

      Darrieus Wind Turbine

      1 Lesson
      1. Lesson 1 33m 33s
    3. Darrieus Turbine, Paper Validation by ANSYS Fluent

      Darrieus Turbine, Paper Validation by ANSYS Fluent

      1 Lesson
    4. Darrieus Wind Turbine CFD Simulation using Dynamic Mesh 6DOF method, ANSYS Fluent Training

      Darrieus Wind Turbine CFD Simulation using Dynamic Mesh 6DOF method, ANSYS Fluent Training

      1 Lesson
    5. Darrieus Vertical Axis Water Turbine, Dynamic Mesh, ANSYS Fluent Training

      Darrieus Vertical Axis Water Turbine, Dynamic Mesh, ANSYS Fluent Training

      1 Lesson

    The Darrieus Turbine Training Package is a focused 5-project path for engineers, researchers, and students who want to simulate vertical axis turbines in ANSYS Fluent, from basic aerodynamic analysis to validated, motion-coupled, and blade-optimized models in both air and water.

    Darrieus Fundamentals & Paper Validation: You start by setting up a transient Darrieus wind turbine model with a rotating sliding-mesh zone, then extract torque, power coefficient, and the flow field around the blades through a full revolution. The validation project reproduces a reference study, comparing the power coefficient across tip speed ratios with published data so you can confirm your mesh, time step, and turbulence model choices before trusting new designs.

    Self-Starting Dynamics with 6DOF: Instead of a prescribed rotational speed, the rotor is driven freely by the aerodynamic torque it produces. Using the 6DOF solver with a rotational constraint and the rotor’s moment of inertia, you capture the start-up behavior and the rise of angular velocity to its steady operating point, a key issue for Darrieus turbines.

    Blade Design: Serrated vs. Plain Airfoil: This project compares a serrated-edge blade against a conventional plain airfoil under the same operating conditions. You assess how the serrations change vortex shedding, dynamic stall, and wake structure, and what that means for torque and power coefficient.

    Vertical Axis Water Turbine: The Darrieus concept is carried over to hydrokinetic energy, simulating a vertical axis turbine in water flow. You see how the higher fluid density changes loads and power output, and how to adapt the setup for river and tidal current applications.

    What’s included:

    • 5 project-based lessons covering wind and water Darrieus turbines

    • Over 1.5 hours of step-by-step video tutorials with English audio

    • Geometry, mesh, and case setup for each project

    • Paper validation against published power coefficient data

    • 6DOF-based self-starting rotor simulation

    • 15 years of MR CFD expertise in turbine CFD

    Looking for horizontal axis turbine simulations? The HAWT: Wind Turbine Training Package covers HAWT rotor aerodynamics, wake analysis, and performance prediction in ANSYS Fluent.

    Whether you’re validating a vertical axis wind turbine for a thesis, testing blade modifications for better start-up and efficiency, or exploring hydrokinetic turbines for river and tidal sites, this package gives you a structured, practical route to reliable Darrieus turbine simulations.

    AI Assistant

    Ask me anything about MR CFD

    How can I help?

    Ask away, I'll point you the right way.

    What I can do on this page

    AI can make mistakes. Check important answers.