Fluid-Structure Interaction over HAWT Turbine Vibration (one-way)
Price: $54
- The problem numerically simulates the Fluid-Structure Interaction over HAWT Turbine using ANSYS Fluent software.
- We design the 3-D model by the Design Modeler software.
- Mesh grid is generated using ANSYS Meshing , and the element number equals 3,465,821.
- The MRF method is used to rotate the turbine.
- FSI model analyses total strain, and stress over the turbine.
Fluid-Structure Interaction over HAWT Turbine Vibration (one-way)
Price: $54
- The problem numerically simulates the Fluid-Structure Interaction over HAWT Turbine using ANSYS Fluent software.
- We design the 3-D model by the Design Modeler software.
- Mesh grid is generated using ANSYS Meshing , and the element number equals 3,465,821.
- The MRF method is used to rotate the turbine.
- FSI model analyses total strain, and stress over the turbine.
Project Description:
In this project, we aim to analyze a Fluid-structure interaction over a HAWT turbine. In this simulation a flow with the speed of 25 m/s heats the turbine, and the turbine itself rotates with 12 RPM. The FSI process was in one-way which we analyzed a fluid effect on the structure.
The total deformation was around 0.2 m at the tip of the blades. Also, the bending stress and strain have been analyzed too.
Also a two-way simulation of Fluid-Structure Interaction over HAWT Turbine was previously conducted,
The geometry is designed in ANSYS Design Modeler software.
In addition, an unstructured mesh grid is generated using ANSYS Meshing software. As a result, 3,465,821 cells were generated.
Methodology: Fluid-Structure Interaction over HAWT Turbine
MRF and FSI have been used to simulate HAWT turbine motion. the velocity is 25 m/s and the operating pressure is 101235 pa. The RPM was set to 12 and the hub has been a simple joint.
The fluid is simulated in fluent and structure section modeled in ANSYS Structure.
For more details and information, click here.
Results:
As the results obtain the pressure and speed in the domain and the structure section we obtained total deformation, strain, and stress over the turbine.