CFD Beginner Courses

Price: $219

This study aims to investigate the aerodynamic performance of a Grumman RQ-4 Global Hawk using ANSYS Fluent. The Global Hawk geometry was modelled using SpaceClaim then imported into ANSYS Fluent for meshing consisting 3,764,695 elements. The simulation used a pressure-based solver.

Price: $14

This study investigates the effects of energy dissipation blocks on the energy dissipation efficiency of stepped spillways using computational fluid dynamics (CFD) simulations. Two spillway configurations, with and without blocks, were analyzed under different flow conditions. The results showed that the presence of blocks enhanced energy dissipation by 6% compared to the conventional stepped spillway design. These findings contribute to the optimization of stepped spillway designs for improved energy dissipation and downstream channel protection.

Price: $14

This study examines CH4 and H2 mixing in T-junction and Y-junction configurations using CFD analysis in ANSYS Fluent. The geometry was created in ANSYS Design Modeler and meshed with ANSYS Meshing, resulting in a high-quality mesh of 2,484,831 quadrilateral elements. The simulation utilizes the Standard k-ε turbulence model and Species Transport model for mixing. An isothermal mixing process is considered without chemical reactions. The analysis compares mixing efficiency, velocity profiles, pressure distributions, and species concentrations between T-junction and Y-junction designs.

Price: $24

This project investigates the performance of a tube with twisted tape inserts and vortex generators in ANSYS Fluent. The study focuses on the cooling of hot alumina nanofluid flowing through the inner tube while exposed to external air flow. The geometry was designed in ANSYS Design Modeler and meshed using ANSYS Meshing. The simulation uses a pressure-based solver with the RNG k-ε turbulence model and enabled energy equation for steady-state conditions. The study demonstrates the impact of twisted tape inserts and vortex generators on flow patterns, providing insights into heat transfer enhancement and cooling efficiency.

Price: $8

This project investigates the steel valve Thermal and Hydraulic performance through CFD analysis in ANSYS Fluent. The study focuses on the cooling of hot water (400K) flowing through the valve while exposed to external air convection (300K). The geometry was designed in ANSYS Design Modeler and meshed using ANSYS Meshing, resulting in a mesh of 2,237,861 elements. The simulation uses a pressure-based solver with the RNG k-ε turbulence model and enabled energy equation for steady-state conditions. The study demonstrates the impact of valve geometry on flow patterns, pressure distribution, and temperature gradients, providing insights into heat transfer and cooling efficiency.

Price: $8

This project investigates the thermal performance enhancement of a heat sink through CFD analysis in ANSYS Fluent. The study focuses on a heat sink design featuring cylindrical pin fins with splitter plates. The geometry was designed in ANSYS Design Modeler and meshed using ANSYS Meshing, resulting in a structured mesh of 804,434 elements. The study demonstrates the impact of splitter plates on flow patterns and heat transfer, potentially improving overall cooling efficiency.

Price: $14

This project investigates the aerodynamic performance enhancement of an airfoil through CFD analysis in ANSYS Fluent. Three configurations are studied: a clean airfoil, an airfoil with a slat, and an airfoil with both slat and flap. The geometry was designed in ANSYS Design Modeler and meshed using ANSYS Meshing, resulting in approximately 5 million elements. The simulations use a density-based solver to account for compressibility effects. The study demonstrates significant improvements in lift-to-drag ratio, particularly when both slat and flap are employed.

Price: $16

The present problem simulates a Six Blade Stirring Mixer using ANSYS Fluent software. We have designed the geometry using DesignModeler software and created the mesh on this geometry using ANSYS Meshing software. The mesh type is unstructured with 5,447,852 cells. The Mixture multiphase model has been used to simulate the present model. The Multiple Reference Frames (MRF) model is used to simulate the motion of impeller. The solution is steady, and the k-Ꜫ model is chosen to simulate the turbulence of the flow.

Price: $72

The problem numerically simulates Arterial Stent using ANSYS Fluent software. We design the 3-D model by the Spaceclaim software. We Mesh the model by ANSYS Meshing software, and the element number equals 220,000 and 250,000 for the Stenosis and stented artery respectively . We use a UDF to define pulsatile blood flow. The Eulerian multiphase model was enabled to distinguish between the blood and arterial wall interfaces.