Chemical Reactions Online Courses
Here's every CFD online course related to Chemical Reactions category.
Packed Bed Reactor with Radiative Quartz Spheres
Intermediate, Advanced
Price: $12
This study numerically simulates the heat transfer and fluid dynamics in a packed bed reactor with radiative quartz spheres using ANSYS Fluent software. The 3-D model is designed using ANSYS Design Modeler and meshed with ANSYS Meshing software, resulting in approximately 4 million polyhedral elements. The simulation employs the RNG k-ε turbulence model with standard wall functions, and the Discrete Ordinate (DO) radiation model to capture temperature variations accurately. The energy equation is enabled to track temperature distribution, and the solver is pressure-based with steady-state conditions. The study aims to provide insights into optimizing packed bed reactor designs for various industrial applications.
Price: $32
This study uses ANSYS Fluent to simulate the combustion process of biomass waste in an industrial incinerator using Computational Fluid Dynamics (CFD). The 3-D geometry is designed in ANSYS Design Modeler, and then is meshed using ANSYS Mesh, with the total 6,893,518 element number. The RNG k-ε model with standard wall functions is utilized for turbulence modeling. The energy equation is enabled to accurately model heat transfer within the system. The species transport model is employed to simulate the combustion process, with two primary reactions defined. The eddy-dissipation model is activated for turbulence-chemistry interaction.
Price: $330
This project investigates the combustion process in a cylindrical chamber with a porous medium using CFD analysis in ANSYS Fluent. The geometry was designed in ANSYS Design Modeler and meshed using ANSYS Meshing, resulting in a high-quality mesh with 815,135 elements. The simulation employs the RNG k-ε turbulence model, Discrete Ordinate (DO) radiation model, and Species Transport model with Volumetric Reactions. Additional submodels for NOx and Soot formation are included. A cylindrical porous zone with 0.5 fluid porosity is incorporated near the inlet. The study demonstrates the impact of the porous medium on flow patterns, temperature distribution, species concentrations, and pollutant formation.
Price: $200
In this project, the combustion of kerosene in a model gas turbine combustor, with all its complexities, was modeled using ANSYS Fluent. Soot formation in the combustion process was modeled with the Moss-Brooks model by selecting "C2H2" and "C2H4" species as precursors for surface growth, and the Lee model for oxidation. The geometry was created in SpaceClaim, and a mesh consisting of 51,427 elements was generated using ANSYS Meshing. The rates of nucleation, surface growth, coagulation, and oxidation, as well as the soot mass fraction and temperature in the combustor, were investigated in this study.
Price: $240
In this project, a Circulating Fluidized Bed(CFB) Boiler is simulated using ANSYS Fluent software. The 3-D geometry is designed in spaceclaim then meshed in ANSYS Meshing producing 437,472 unstructured cells. The species transport including volumetric reactions, is taken into account for modeling combustion. The DPM model is used to model the particles.
Price: $60
In this project, liquid fuel combustion is simulated using DPM module. The geometry was designed in SpaceClaim, and a mesh with 769000 elements was generated using ANSYS Meshing. The species transport module is employed. The fuel is ethanol and the oxidizer is nitrous oxide.
Price: $499
In this project, we perform the numerical simulation of a PEM Fuel Cell Stack System using ANSYS Fluent software. We designed the geometry of the model in 3D using Design Modeler software. We meshed the model using ANSYS Meshing software, and 9,946,409 cells have been generated. We used the Fuel Cell and Electrolysis model and the PEMFC submodel to define the proton-exchange membrane fuel cell. We applied the Stack Management option to define multiple fuel cell units. The Species Transport model is automatically activated because of using the fuel cell model.
Price: $629
The problem numerically simulates Fuel Cell with Cooling System using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 4,984,882. We use the Fuel Cell and Electrolysis Model to define a fuel cell. We used the SOFC sub-model to define a solid oxide fuel cell. We used the Species model to define H2, O2, and H2O.
Price: $20
In this project, we have simulated the performance of a Porous Media Reactor Tube with the presence of catalyst using ANSYS Fluent software. Three-dimensional modeling was done using Design Modeler software. The meshing of the model has been done using ANSYS Meshing software and the element number equals 4,255,042 . To simulate the behavior of molten salt and reactor inlet flow, the multiphase VOF Eulerian model is utilized. The porous media model is employed to impact the flow inside the reactor. For the reactions, the species transport model with two reactions is used.