Engineering Fields Online Courses
Here's every CFD online course related to Engineering Fields category.
Profile Macro, UDF, Pressure Profile CFD Simulation
Intermediate, Advanced
Price: $24
The problem numerically simulates the air pressure profile in an urban area using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. The mesh is Structured, and the element number equals 118,400. We use the User-Defined Function (UDF) to define a pressure profile. We use the Profile Macro for UDF.
Init Macro, UDF, Initial Temperature CFD Simulation
Intermediate, Advanced
Price: $180
The problem numerically simulates the double-pipe heat exchanger using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. The mesh is Structured, and the element number equals 147,200. We use the User-Defined Function (UDF) to define an initial temperature. We use the INIT Macro for UDF.
Delta T Macro UDF, Time Step Control CFD Simulation
Intermediate, Advanced
Price: $180
The problem numerically simulates the water filling in the tank using ANSYS Fluent software. We design the 2-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 135996. We performed the simulation in a Transient (unsteady state). We use the VOF Multiphase model to define water and air. We use the User-Defined Function (UDF) to control time step size. We use the DELTAT Macro for UDF.
Price: $240
The problem numerically simulates the evaporation and condensation using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software; the element number equals 1,574,100. We use the VOF Multiphase model to define water, liquid, and vapor. We define a Mass Transfer between water liquid and water vapor. We use the User-Defined Function (UDF) to define a mass transfer (evaporation and condensation). We use the Mass-Transfer Macro for UDF.
Slurry Flow Erosion In Centrifugal Pump CFD Simulation
Intermediate, Advanced
Price: $160
The problem numerically simulates Slurry Flow in Centrifugal Pump using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We Mesh the model with ANSYS Meshing software, and the polyhedra element number equals 1,498,132. We use the Frame Motion to define the rotational movement in the rotating zone. The DPM multiphase is activated to model the effect of solid particles on erosion. The activated erosion models are Generic, Finnie, McLaury, Oka, and DNV.
Sludge Flow In Centrifugal Pump CFD Simulation
Intermediate, Advanced
Price: $16
The problem numerically simulates Slurry Flow in Centrifugal Pump using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We Mesh the model with ANSYS Meshing software, and the polyhedra element number equals 1,498,132. We use the Frame Motion to define the rotational movement in the rotating zone. The Mixture multiphase model is activated to model the effect of solid particles.
Price: $240
This project numerically simulates the Population Balanced Model Crystallization using ANSYS Fluent software. The 2-D geometry is designed in Design Modeler software. We used ANSYS Meshing Software to generate mesh; the element number equals 89,244. The multiphase Eulerian multiphase model simulates the mixture (water liquid, Ca, and CO3 ions) and Calcium-Carbonate. The crystallization modeling through PBM is also considered.
Price: $180
This project numerically simulates the Air Bubble PBM using ANSYS Fluent software. The 2-D geometry is designed in Design Modeler software. We used ANSYS Meshing Software to generate mesh; the element number equals 23,982. The multiphase Eulerian multiphase model simulates the two-phase flow of water and air. The population balance model also enables simulating bubble dynamics and interactions. Aggregation and Breakage kernels were activated, and the Luo model was used for both kernels. The mixture method for the turbulence interactions of the phases is activated.
Price: $220
This project numerically simulates the Hydro-Abrasive Erosion in Pelton Turbine using ANSYS Fluent software. The 3-D geometry is designed in Design Modeler software. We used ANSYS Meshing Software to generate mesh; the element number equals 6,433,121. The multiphase VOF model simulates the water jet. The 2-way DPM model also enables the erosion of the solution. The rotational movement of the turbine is modeled using Mesh Motion Approach.