Engineering Fields Online Courses

Here's every CFD online course related to Engineering Fields category.

898 Courses

Price: $56

This study presents a CFD analysis of a Savonius VAWT using mesh motion in ANSYS Fluent to examine aerodynamic performance and flow characteristics. The rotor geometry was modeled in DesignModeler and meshed with a non-conformal, unstructured grid containing about 5.5 million cells for accurate flow resolution. A transient, pressure-based solver with the RNG k-ε turbulence model was applied; air was used as the working fluid, with rotating and stationary flow zones defined. The simulation revealed pressure variations, wake formation, and vortex structures around the blades, highlighting key aerodynamic behaviors of the Savonius VAWT.

Play

Price: Free

End-to-End UAV Design: Master the complete UAV design methodology, from initial mission analysis to preliminary drone design. Industry-Standard CFD Tools: Gain hands-on expertise with Ansys Fluent and AVL for high-fidelity aerodynamic simulation. Performance & Stability Analysis: Evaluate drone aerodynamics, flight stability, and overall performance through project-driven CFD training.

Play

Price: $20

This study simulates the drying seed process in a semi-cylindrical porous domain to analyze airflow, heat, and moisture transfer. The drying seed model uses a half-domain with about 4.5 million tetrahedral cells, including fluid and porous seed zones. A transient, pressure-based solver with the RNG k-ε model and species transport simulates the drying seed. The drying seed simulation shows uniform temperature and decreasing moisture, indicating efficient drying performance.

Play

Price: $150

This report presents a simulation that investigates the thrust generation of a VTOL (Vertical Take-Off and Landing) jet engine operating in vertical mode. The aerodynamic performance and thrust force produced by a rotating fan within a bent pipe configuration were analyzed. The 3D geometry of the bent pipe with fan was created using ANSYS SpaceClaim software. A high-quality unstructured mesh with boundary layer refinement was generated using ANSYS Meshing software. Appropriate turbulence model settings and boundary conditions were applied to correctly simulate the rotating fan dynamics and the resulting thrust force generation.

Play

Price: $120

This project investigates the crystallization of Loratadine in a dual-inlet nozzle using the Population Balance Model (PBM) in ANSYS Fluent. The study focuses on the effects of mixing and flow dynamics on nucleation and crystal growth. A tetrahedral mesh with 506,677 cells was used for accurate flow and particle tracking. A User-Defined Function (UDF) defined the kinetics of crystal formation based on local conditions. The results show realistic particle size distribution and effective prediction of crystallization behavior.

Play

Price: $120

A 2D symmetric geometry with a structured mesh of 310,000 cells was created, refined near the projectile walls for accuracy. This project investigates the cavitation phenomenon caused by a projectile moving through water using ANSYS Fluent. A transient, pressure-based solver with the Volume of Fluid (VOF) model captures the phase interaction between liquid and vapor. The simulation analyzes velocity, pressure, and vapor volume fraction around the projectile.

Play

Price: $360

The geometry represents the meat sample and surrounding air domain, discretized with a structured mesh of 58,800 elements to accurately capture heat and mass transfer gradients. The meat drying process was simulated using CFD to analyze heat and mass transfer during drying. The VOF model was applied to capture multiphase interactions between liquid water and vapor. The meat was modeled as a porous medium to represent internal moisture transport. Infrared heating and air convection were used as drying mechanisms under two operating cases. Results showed that higher heat flux and temperature enhanced drying efficiency and reduced moisture content.

Play

Price: $60

This project presents a CFD simulation of a solar collector designed to analyze heat transfer and fluid flow inside a U-shaped tube. The system uses water as the working fluid under steady-state conditions. The outer wall is maintained at a constant high temperature to simulate solar heating. Results show an effective temperature rise, confirming efficient thermal performance of the collector.

Play

Price: $80

This simulation studies airflow around an airfoil placed above a sinusoidal wall using mesh motion in ANSYS Fluent to analyze aerodynamic effects. The 2D model includes an airfoil over a wavy bottom surface, divided into stationary and moving zones, with a structured refined mesh near the airfoil and wall. A transient pressure-based solver with the k–ω SST turbulence model was applied using a 55 m/s inlet velocity and mesh motion of 56 m/s for the moving zone. Velocity contours show accelerated flow over the airfoil’s upper surface, while pressure contours indicate low pressure above and high pressure below, confirming lift generation influenced by the wavy boundary.

Play

AI Assistant

Ask me anything about MR CFD

How can I help?

Ask away, I'll point you the right way.

What I can do on this page

AI can make mistakes. Check important answers.