Fluent Modules Online Courses

Here's every CFD online course related to Fluent Modules category.

724 Courses

Price: $28

The fan geometry, consisting of six blades and three zones, was created in DesignModeler and meshed with an unstructured tetrahedral grid of about 3 million elements. Broadband noise sources were applied in ANSYS Fluent to evaluate the acoustic performance and sound power level distribution. The Multiple Reference Frame (MRF) approach was used to model the rotating zone at 3000 RPM under steady-state conditions. Results show high-pressure and velocity regions near the blade tips, leading to stronger acoustic power levels along the fan casing.

Play

Price: $100

The centrifugal pump was modeled in ANSYS with two zones: the stationary casing and the rotating impeller. A triangular mesh with 17,536 cells was generated to discretize the geometry. The impeller was simulated using the Moving Reference Frame (MRF) approach with a rotation speed of 1500 RPM.

Play

Optimization, DOE: CFD Simulation Masterclass

Beginner, Intermediate, Advanced

Price: $299

Master optimization process with our “Optimization (DOE and RSM): All Levels” CFD course using ANSYS Fluent. From basics to advanced, learn to perform Optimization procedures with different types of Design of Experiments (DOEs) and various Response Surface methodologies (RSMs). This course equips you with the essential skills to optimize all construction designs in all engineering fields using CFD. Ideal for beginners and experts alike, enhance your capabilities in design optimization for cutting-edge research and industrial applications.

Play

Price: $20

This project presents a CFD simulation of a centrifugal pump performed in ANSYS Fluent using the mesh motion approach. The geometry was modeled in SpaceClaim/DesignModeler and discretized into a high-quality tetrahedral mesh (About 2M elements). A pressure-based transient solver with the k–ω SST turbulence model was applied, with water as the working fluid. Results show a clear pressure rise from impeller inlet to outlet, confirming efficient energy transfer by the pump.

Play

Price: $210

This project simulates slug flow of gas–liquid mixture in a bent pipe using ANSYS. The VOF multiphase model is applied to capture slug formation, phase separation, and velocity distribution. Results show strong gas redistribution and velocity rise up to 48 m/s in pipe bends. The structural response is negligible, with displacements around 10⁻¹⁴ m near curved sections.

Play

Price: $16

This project presents a CFD analysis of a centrifugal pump using ANSYS Fluent. The 3D geometry was modeled in SpaceClaim and meshed with about 2 million tetrahedral elements. The simulation used a steady pressure-based solver with the k-ω SST turbulence model and MRF for rotation at 1500 RPM. Results show a clear velocity increase up to ~300 m/s and a significant pressure rise across the impeller and volute.

Play

Price: $220

This work presents a CFD–DEM simulation of a rotary seed dryer. Hot air flows through the inclined drum at 350 K while the drum rotates at 20 RPM. Seeds are modeled with the Discrete Phase Model (DPM) coupled with evaporation into H₂O vapor. The Discrete Element Method (DEM) accounts for particle–particle and particle–wall collisions, improving realism of seed motion. Contours of H₂O mass fraction reveal zones of strong evaporation, reaching values up to 0.0026. The combined CFD–DPM–DEM approach shows how airflow, fin mixing, and collisions enhance drying efficiency.

Play

Price: $63

This project presents a numerical study of heat transfer in a heat sink using ANSYS Fluent. Four cases were simulated, including pure water (single-phase) and three nanofluids (water mixed with TiO₂, SiO₂, and Fe₃O₄) using the mixture multiphase model. The geometry was created in ANSYS DesignModeler, and a high-quality mesh of about 1.6 million elements was generated. A pressure-based, steady-state solver with the SIMPLE algorithm was applied. The results, illustrated in contour plots of velocity and temperature, show that nanofluids enhance cooling efficiency compared to pure water. Among the tested fluids, the Fe₃O₄–water mixture demonstrated the best thermal performance at the fins and base plate, highlighting its potential for advanced heat sink applications

Play

Price: $270

In the oscillating multiphase CFD study, the interaction of water and air inside a narrow rectangular channel is investigated using ANSYS Fluent. The geometry is created in ANSYS Design Modeler and meshed with a structured grid of 480,760 cells in ANSYS Meshing. The Volume of Fluid (VOF) method is applied for tracking the water and air interface, with water defined as the primary phase and air as the secondary phase. A dynamic mesh technique with smoothing and re-meshing options is enabled, along with a moving wall defined by a User-Defined Function (UDF).

Play

AI Assistant

Ask me anything about MR CFD

How can I help?

Ask away, I'll point you the right way.

What I can do on this page

AI can make mistakes. Check important answers.