Industrial Online Courses

Price: $319

In Quadcopter Aerodynamic Analysis, a numerical simulation was conducted to investigate the Dynamic Stability Derivatives of a quadcopter using ANSYS Fluent. A 3D symmetric geometry of the quadcopter was designed in SpaceClaim, capturing the essential aerodynamic features of the body and blades. The geometry was meshed using ANSYS Meshing, resulting in a high-quality grid with 3736312 elements. The simulation was performed in an unsteady (transient) framework to capture the time-dependent aerodynamic behavior. Mesh Motion techniques and User-Defined Functions (UDFs) were employed to define the rotational motion of the blades and the oscillatory motions of the quadcopter. This approach enabled the extraction of stability derivative data, providing insight into the dynamic response and control requirements of the quadcopter system.

Price: $499

This product numerically simulates a Battery Pack using ANSYS Fluent software. We use the Pack Builder to define a battery pack consisting of two Battery Modules and a Cold Plate. We design the 3-D models with the Design Modeler software. We mesh the models with ANSYS Meshing software. We use the Circuit Network Battery model to define the discharge. We use the ECM (Equivalent Circuit Model) sub-model to determine the electrochemical computations. The run calculation is in an unsteady state (transient).

Price: $669

This product numerically simulates the Lithium-Ion Battery with PCM using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. We use the Battery Model to define a battery discharge. We use the Multi-Scale Multi-Domain (MSMD) solution method and NTGK electrochemistry model. We used the Solidification and Melting Model to define phase change material (PCM). The present CFD work is Validated with a reference Article.

Price: $439

This product numerically simulates the Battery Module Pack using ANSYS Fluent software. We design the 3-D model in parallel and serial connection with the Design Modeler software. We mesh the model with ANSYS Meshing software; the element numbers are 269562. We use the Circuit Network Battery model to define the charge/discharge. We use the ECM (Equivalent Circuit Model) sub-model to determine the electrochemical computations. We use the Pack Builder to define the battery module pack. The run calculation is in an unsteady state (transient).

Price: $108

This report presents the results of a CFD analysis performed on a tilt-rotor drone using ANSYS Fluent with mesh motion capabilities for the arms and propellers. The geometry of the Drone was created using ANSYS SpaceClaim software. A high-quality non-conformal un-structured mesh was generated using ANSYS Meshing software. Applied Mesh motion for both arms and propellers

Price: $439

This product numerically simulates the Cylindrical Battery Pack using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, element numbers are 485797. We use a Virtual Connection to define a battery pack without designing busbars. We use the MSMD (Multi-Scale Multi-Domain) Battery model to define the charge/discharge. We use the ECM (Equivalent Circuit Model) sub-model to determine the electrochemical computations. The run calculation is in an unsteady state (transient).

Price: $379

This product numerically simulates the 4S6P Battery Pack using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, the element numbers are 499001. We use the MSMD (Multi-Scale Multi-Domain) Battery model to define the charge/discharge. We use the ECM (Equivalent Circuit Model) sub-model to determine the electrochemical computations. The run calculation is in an unsteady state (transient).

Price: $499

This product numerically simulates the Parallel and Serial Battery Pack using ANSYS Fluent software. We design the 3-D models in parallel and serial connection with the Design Modeler software. We mesh the models with ANSYS Meshing software; the element numbers are 74240 and 73216. We use the MSMD (Multi-Scale Multi-Domain) Battery model to define the charge/discharge. We use the ECM (Equivalent Circuit Model) sub-model to determine the electrochemical computations. The run calculation is in an unsteady state (transient).

Price: $319

This product numerically simulates the Battery Charge/Discharge using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, the element number is 55339. We use the MSMD (Multi-Scale Multi-Domain) Battery model to define the charge/discharge. We use the ECM (Equivalent Circuit Model) sub-model to determine the electrochemical computations. We use the Time-Scheduled Profile to define charge and discharge rates. The run calculation is in an unsteady state (transient).