Rotary Equipments Online Courses

Price: $64

This study simulates powder distribution in a stationary fluid after mixing using ANSYS Fluent. The geometry, representing a mixer tank with a rotating propeller, is designed in ANSYS SpaceClaim and meshed using ANSYS Meshing, resulting in about 3,000,000 cells. The simulation is conducted as a transient analysis for a limited time period. The Eulerian multiphase model is employed, with the granular option activated for the powder phase. Mesh motion is enabled to model the propeller rotation at 30 rpm.

Price: $14

This study investigates the airflow dynamics of a 2D wind turbine using CFD analysis in ANSYS Fluent. The 2D geometry was created in ANSYS Design Modeler and meshed using ANSYS Meshing, resulting in a tetrahedral mesh of 60,912 elements. The simulation utilizes a dynamic mesh feature with remeshing and smoothing methods, coupled with a Six DOF (Degree of Freedom) model for turbine rotation. A transient, pressure-based solver captures time-dependent flow characteristics. The simulation examines airflow patterns, velocity distributions, and turbine performance over multiple time steps, visualized through velocity magnitude contours.

Price: $56

This study investigates the flow dynamics in a steam turbine using CFD analysis in ANSYS Fluent. The 3D geometry was created in SpaceClaim and meshed using ANSYS Meshing, resulting in about 19 million tetrahedral elements. The simulation utilizes the Realizable k-ε turbulence model with standard wall function and includes the energy equation for temperature analysis. A density-based solver with real-gas-peng-robinson model is employed for compressible flow.

Price: $64

This project investigates turbocharger performance using CFD analysis in ANSYS Fluent, focusing on the fluid flow and thermal behavior of air through a one-sixth periodic sector of the geometry. The geometry was prepared using Vista CCD and BladeGen, and the mesh was generated with TurboGrid as a structured grid containing 972,176 cells. A pressure-based solver with the SST k-ω, k-ω turbulence model was used, and blade rotation was simulated at 92,000 RPM with the Frame Motion approach. The results highlight the influence of geometry on flow patterns, pressure distribution, and temperature gradients, offering insight into compression efficiency and overall turbocharger performance.

Price: $16

The present problem simulates a Six Blade Stirring Mixer using ANSYS Fluent software. We have designed the geometry using DesignModeler software and created the mesh on this geometry using ANSYS Meshing software. The mesh type is unstructured with 5,447,852 cells. The Mixture multiphase model has been used to simulate the present model. The Multiple Reference Frames (MRF) model is used to simulate the motion of impeller. The solution is steady, and the k-Ꜫ model is chosen to simulate the turbulence of the flow.

Price: $64

This project simulates an Archimedes Spiral Wind Turbine in ANSYS Fluent software. The geometry is designed in Solid works then meshed in ANSYS Meshing with 3,207,809 unstructured cells. The rotation of the blade is simulated via Mesh Motion. The turbulence of the air flow is modeled with SST k-w model.

Price: $10

The problem numerically simulates Centrifugal Blower using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 5,479,874 . We use the Mesh Motion method to define rotational motion in cell zone conditions.

Price: $64

In this project, a Gorlov vertical axis wind turbine is simulated using ANSYS Fluent software. The geometry is re-designed in ANSYS Spaceclaim software and meshed in ANSYS Meshing software. The angular motion is simulated using the sliding mesh (mesh motion) model.

Price: $32

The current CFD Analysis numerically Validates the Paper "Experimental study of shrouded micro-wind turbine" via ANSYS Fluent software. We have designed and meshed the geometry using Design Modeler and ANSYS Meshing then meshing in fluent, producing 2,356,897 polyhedral elements. MRF is used to simulate rotating zone. The turbulence of the flow is simulated via K-w sst model.