SpaceClaim Online Courses

Price: $48

This study investigates the performance of a spiral magnetic separator using ANSYS Fluent. The geometry, representing a spiral-shaped separator with multiple turns, is designed in ANSYS SpaceClaim and meshed using ANSYS Meshing. The simulation is conducted as a steady-state analysis with a pressure-based solver. The Realizable k-epsilon turbulence model is employed, along with a two-way coupled Discrete Phase Model (DPM) for particle simulation. The Magnetic Induction MHD Method is enabled to model the applied magnetic field, with User-Defined Functions (UDFs) implemented for magnetic field components. Results reveal complex interactions between fluid flow, magnetic particles, and the applied magnetic field, demonstrating the separator’s effectiveness in particle segregation.

Price: $64

This study simulates powder distribution in a stationary fluid after mixing using ANSYS Fluent. The geometry, representing a mixer tank with a rotating propeller, is designed in ANSYS SpaceClaim and meshed using ANSYS Meshing, resulting in about 3,000,000 cells. The simulation is conducted as a transient analysis for a limited time period. The Eulerian multiphase model is employed, with the granular option activated for the powder phase. Mesh motion is enabled to model the propeller rotation at 30 rpm.

Price: $14

This study investigates the thermal performance of an HVAC system with Phase Change Materials (PCMs) using ANSYS Fluent. The geometry, representing a U-shape pipe system with PCM-filled pipes, is designed in ANSYS SpaceClaim and meshed using ANSYS Meshing, resulting in 6,204,324 polyhedra elements. The simulation is conducted as a transient analysis over 24 hours. The RNG k-ε turbulence model is employed, and the Solidification and Melting model is activated with a Mushy Zone Parameter of 100,000. The energy equation is enabled to accurately model heat transfer.

Price: $63

In this project, generation of sound by displacing of speaker diaphragm is modeled using ANSYS Fluent. The geometry was created in SpaceClaim, and a mesh consisting of 687,500 elements was generated using ANSYS Meshing. Dynamic mesh used to model the movement of diaphragm during simulation. In this project we are going to analyze and see how a speaker can generate a specific sound wave.

Price: $20

In this project, the explosion of TNT, with all its complexities, was modeled using ANSYS Fluent. Explosion starts with a fast decomposition reaction that increase the temperature and pressure suddenly that follow by a series of pressure waves. The geometry was created in SpaceClaim, and a mesh consisting of 2,673,750. elements was generated using ANSYS Meshing. The animation of pressure in domain presented and compression wave speed is calculated.

Price: $72

The problem numerically simulates Arterial Stent using ANSYS Fluent software. We design the 3-D model by the Spaceclaim software. We Mesh the model by ANSYS Meshing software, and the element number equals 220,000 and 250,000 for the Stenosis and stented artery respectively . We use a UDF to define pulsatile blood flow. The Eulerian multiphase model was enabled to distinguish between the blood and arterial wall interfaces.

Price: $160

In this project, fire of a fuel tank caused by fuel leakage is modeled using ANSYS Fluent. The geometry was created in SpaceClaim, and a mesh consisting of 1,262,049 elements was generated using ANSYS Meshing. The effect of blowing wind on the temperature of the room 10m away from this tank is investigated.

Price: $140

The problem numerically simulates Evaluation of NO and Soot Emissions from Wood Gas Flare using ANSYS Fluent software. We design the 3-D model with the SpaceClaim software. We Mesh the model with ANSYS Meshing software, and the element number equals 2.8 millions. Energy and species transport models were enabled to account for heat transfer and chemical reactions.

Price: $6

In this project, the flow around a projectile is modeled using ANSYS Fluent. The geometry was created in SpaceClaim, and a mesh consisting of 2,871,393 elements was generated using ANSYS Meshing. In this project we are going to find the center of pressure and calculate the lift force on the projectile .