SpaceClaim Online Courses

Price: Free

Learn SpaceClaim from scratch! This complete training course teaches you 3D modeling, geometry editing, and CAD preparation for simulations. Master direct modeling techniques, geometry repair, and simplification tools essential for CFD and FEA analysis. Ideal for engineers and designers working with ANSYS simulations. Step-by-step tutorials take you from beginner to advanced user.

Price: $28

In this project, the evaporation of soil moisture in a fluidized bed was simulated using ANSYS Fluent. The geometry was created in SpaceClaim, and a mesh consisting of 22,000 elements was generated using ANSYS Meshing. The Eulerian model was chosen to simulate multiphase flow, and the species transport model was used to define the mixture in each phase. Evaporation was modeled using the evaporation-condensation method based on the Lee

Price: $319

Taxi Drone Ansys Fluent Simulation involves using advanced CFD software to analyze the aerodynamic performance of urban air mobility vehicles The geometry of the taxi drone was designed using ANSYS SpaceClaim , The mesh was generated using ANSYS Meshing, resulting in a total of 2,829,977 elements The velocity inlet was set to 30 m/s with an angle of attack of 5 degrees. The rotational speed of the blades was configured with MRF method at 5000 RPM, with the upper and lower blades rotating in opposite directions.

Price: $56

This study investigates the aerodynamic performance of a turbine vane using CFD simulations with two different turbulence models The simulations were conducted using ANSYS Fluent, comparing the k-Omega SST and Large Eddy Simulation (LES) turbulence models The geometry of the turbine vane was created using ANSYS Design Modeler. The computational domain was then discretized using ANSYS Meshing, resulting in a high-resolution structured mesh of 12,634,415 elements

Price: $20

This report discusses the CFD simulation conducted for the Switchblade 300 using ANSYS Fluent software The geometry of the Switchblade 300 was created using SpaceClaim Initially, Using ANSYS Meshing, a non-conformal mesh with approximately 40 million tetrahedral cells was generated, after that We decided to change the mesh type to polyhedral in Ansys fluent to decrease the number of mesh elements from 40,000,000 to 7,000,000 The setup included a velocity inlet of 28.05 m/s, an angle of attack of 5 degrees, and a rotational speed of 5000 RPM

Price: $319

This study focuses on the aerodynamic analysis of the Switchblade 300 using ANSYS Fluent Two scenarios are simulated: one with the rear blade stationary and the other with the rear blade in motion. The geometry of the Switchblade was created using SpaceClaim software,The meshing was performed in Fluent Meshing, utilizing a polyhedral mesh with over 7,600,000 elements The Multiple Reference Frame (MRF) approach was employed to simulate the rotating rear blade at 5000 RPM.

Price: $14

This product uses ANSYS Fluent software to investigates the effect of thermocapillary convection on the melting and deforming processes of a Phase Change Material (PCM) subjected to local heating The VOF method tracks the deformable liquid-gas interface Thermocapillary convection is modeled by including a volumetric source term in the momentum equation Enthalpy-Porosity Method models the melting process The geometry is designed using SpaceClaim, and the meshing is performed using Ansys Meshing, with 47,500 cells.

Price: $32

This study extends the previous simulation of the VA-111 Shkval rocket using ANSYS Fluent software by incorporating mass transfer to capture the cavitation effects The geometry is designed in SpaceClaim, and the meshing is performed using Fluent Meshing; the element number equals 257,000 polyhedral cells. The simulation uses the Pressure-based and VOF Multiphase model to define a two-phase flow To capture the cavitation effects, the Zwart-Gerber-BelAmri model is enabled

Price: $40

we are simulating the solar panel that is floated on the water surface,The simulation is 3D and the solar panels and performed by ANSYS Fluent. The geometry is designed using Spaceclaim software. Then, it is meshed in ANSYS Meshing. In total 479895 cells are generated. phases are modeled by Volume of Fluid multiphase model. The dynamic mesh can reproduce elements by remeshing and smoothing types. Also, the radiation is activated.