Turbomachinery Online Courses
Here's every CFD online course related to Turbomachinery category.
Archimedes Screw Turbine (AST) CFD Simulation
Intermediate, Advanced
Price: $60
The problem numerically simulates the Archimedes Screw Turbine (AST) using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. The model is meshed by ANSYS Meshing software, and the element number is more than 2000000 elements. The simulation is carried out Transient state and Mesh Motion model. The VOF model and Open Channel Flow option are used.
Two-Blade Savonius Wind Turbine: 3-D
Beginner, Intermediate, Advanced
Price: $48
This project uses ANSYS Fluent to numerically simulate a Savonius (two-blade) wind turbine. The 3D model is built in SpaceClaim. The model is meshed in ANSYS Meshing, with an element count of 494,456. The simulation is run as unsteady (transient). The Mesh Motion model is used to define the rotational motion.
Two-Blade Savonius Wind Turbine: 2-D
Beginner, Intermediate, Advanced
Price: $42
This project uses ANSYS Fluent to numerically simulate a Savonius vertical axis wind turbine. The 2D model is built in Design Modeler. The model is meshed in ANSYS Meshing, with an element count of 58,468. The simulation is run as unsteady (transient). The Mesh Motion model is used to define the rotational motion.
Cavitation in a Cross-Flow Turbine CFD Simulation
Intermediate
Price: $260
In this project, Cavitation in a Cross-Flow Turbine With&Without Airfoil in the Entrance has been simulated and the results of this simulation have been investigated.
Twin Screw Pump, ANSYS Fluent CFD Simulation Training
Intermediate, Advanced
Price: $16
The problem numerically simulates the Twin Screw Pump using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 1184161. We perform this simulation as unsteady (Transient). We use the Mesh Motion method to define rotational motion around pump screws.
Serrated Vs. Plain Airfoil: Darrieus VAWT
Beginner, Intermediate, Advanced
Price: $72
This project uses ANSYS Fluent to numerically simulate and compare a serrated-airfoil and a plain-airfoil turbine. The 3D model is built in Design Modeler. The model is meshed in ANSYS Meshing, with an element count of 1,186,185. The simulation is run as unsteady (transient). The rotating motion of the turbine blades is defined using the Mesh Motion option.
Price: $160
The problem numerically simulates the Wind Farm with Series Arrangement using ANSYS Fluent software. We design the 3-D model by the SpaceClaim software. We Mesh the model by ANSYS Meshing software, and the element number equals 7588964. We use the Frame Motion model to define the rotational movement.
Turbine Hydropower in Waterline Optimization, Paper Numerical Validation by ANSYS Fluent
Intermediate, Advanced
Price: $240
In this project, we intend to simulate the lift-based in-pipe water turbine using the mesh motion method to compare and validate the results with the results in the article.
Helical Blade Wind Turbine: 5 different RPMs
Beginner, Intermediate, Advanced
Price: $220
This project uses ANSYS Fluent to numerically simulate a helical-blade vertical axis wind turbine. The project investigates the tip speed ratio (TSR) across different blade rotational speeds. The 3D model is built in Design Modeler. The model is meshed in ANSYS Meshing, with a polyhedral element count of 507,457. The simulation is run as unsteady (transient). The Mesh Motion method is used to define the rotational motion in a distinct zone around the blades.