VOF Online Courses
Here's every CFD online course related to VOF category.
Distillation Column Tray CFD Simulation, Two Phase
Intermediate
Price: $24
The present problem simulates the two-phase flow of air and water in a distillation column tray.
Price: $330
This problem simulates the HVAC of an operating room by ANSYS Fluent software. The geometry of the present model is drawn by Design Modeler software and then meshed by ANSYS Meshing software. It's a Structured mesh, and the cell number equals 938174. The VOF multiphase model is used for three phases: air, water vapor, and water fluid. Mass Transfer is applied to simulate Evaporation/Condensation. Also, a UDF file is used to determine the Surface Evaporation.
Stepped Spillway (Stair Spillway) CFD Simulation, ANSYS Fluent Training
Beginner, Intermediate
Price: $28
In this analysis, two-dimensional simulation of a stepped spillway by ANSYS Fluent software is presented.
Bridge Pillars External Two-Phase Flow CFD Simulation, ANSYS Fluent Training
Beginner, Intermediate
Price: Free
The problem numerically simulates the Bridge Pillars External Two-Phase Flow using ANSYS Fluent software. The 3-D geometry is designed in Design Modeler software. We used ANSYS Meshing to generate mesh; the element number equals 270,812. Two phase flow (air and water as first and second phase respectively) is simulateed using VOF model. Turbulent flow is modeled with RNG k-epsilon model.
Shower Channel Drain CFD Simulation, ANSYS Fluent Training
Beginner, Intermediate
Price: Free
The problem numerically simulates Shower Channel Drain using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 1310945. We use the VOF Multi-Phase Model to define water and air in the channel.
Solidification of Molten Steel in a Solidifying Chamber
Beginner, Intermediate
Price: $100
In this project, the solidification process of molten steel inside a solidifying chamber is simulated by applying a VOF multi-phase model by ANSYS Fluent.
Mixer Tank CFD Simulation, ANSYS Fluent Training
Beginner, Intermediate
Price: $56
The problem numerically simulates the Mixer Tank using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 152641. We use VOF multi-phase model to define 3 phases: air, water and salt. We use the Frame Motion method to define rotational motion for the impeller.
Oscillatory Wave and its Effect on Fin Motion, ANSYS Fluent CFD Training
Intermediate, Advanced
Price: $99
The problem numerically simulates the Rotational Motion of a Fin under the influence of Oscillatory Wave flow using ANSYS Fluent software. We design the 2-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 120049. We perform this simulation as unsteady (Transient). We use the two-phase VOF model to define the flow field containing the water and air. We use Dynamics Mesh to define deformation of the grid around the moving wall. We determine only one degree of freedom (1-DOF) to rotate the fin. We use a UDF to define the reciprocating motion of the wall that causes the wavy flow.
Price: $16
The problem numerically simulates an Injector using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 102752. We use the VOF Multi-Phase model to define water and air in an injector.