Price: $509

The Heat Exchanger Advanced Training Package delivers 10 hands-on ANSYS Fluent and CFX projects, taking experienced engineers, researchers, and graduate students into research-grade thermal analysis. It covers evaporation-condensation in porous heat exchangers, PCM and nanofluid cases with paper validation, conjugated heat transfer in plate and finned tube designs, ANSYS CFX plate heat exchanger modeling, pin and plate heat sink comparison, sedimentation and erosion in shell-and-tube units, an industrial shell-and-tube study, and UDF-based initialization. Includes over 4 hours of step-by-step video lessons, English audio with subtitles in six languages, and 15 years of MR CFD expertise for confident, publication-ready heat exchanger CFD.

Price: $269

The Heat Exchanger Intermediate Training Package delivers 10 hands-on ANSYS Fluent projects, taking engineers, researchers, and students beyond the basics into real-world thermal design. It covers condensation in shell-and-tube condensers, solar heat exchangers, triplex tube PCM units with paper validation, spiral baffle, finned tube, helical tube, and vertical spiral tube designs, planar exchangers with mixing tabs, double pipe counter flow, and triple heat exchangers. Includes nearly 3 hours of step-by-step video lessons, English audio with subtitles in six languages, and 15 years of MR CFD expertise for a confident step up in heat exchanger CFD.

Price: $60

This project simulates a shell-and-tube heat exchanger in ANSYS Fluent to analyze coupled flow and heat transfer of water. A pressure-based steady RANS approach with the k–ω SST turbulence model is used, with coupled pressure–velocity solution. The geometry includes shell and tube zones plus a Sterling valve region; a ~2,000,000-cell mesh with inflation layers resolves near-wall gradients. Boundary conditions: velocity inlet (0.3 m/s, 45 °C), pressure outlet, no-slip walls, and cooled valve/tank walls at 13 °C. Results show inlet acceleration, tube-bundle mixing, and progressive cooling, yielding realistic temperature and velocity fields.

Price: $200

In this project, the heat transfer performance of a shell-and-tube heat exchanger with air bubble injection was simulated using ANSYS Fluent software. Three cases were studied: air injection into the shell, into the tube, and into both sides simultaneously. The geometry was created in SpaceClaim and meshed in ANSYS Meshing, initially generating about 12.6 million tetrahedral elements, later converted to a polyhedral mesh with approximately 2.43 million cells to reduce computational cost. The model was solved using a pressure-based steady solver with gravity effects included. A VOF multiphase model was applied to track air and water phases, while the realizable k-ε turbulence model with standard wall functions was used to capture flow behavior. The energy equation was enabled, and the SIMPLE algorithm with second-order upwind discretization ensured solution accuracy.

Price: $100

This product numerically simulates a Ground Heat Exchanger using ANSYS Fluent software. We designed the 3-D model using the Design Modeler software. We meshed the model with ANSYS Meshing software; the element numbers are 3060397. We performed the present simulation in two cases, including cooling and heating.

Price: $179

The Heat Exchanger Beginner Training Package delivers 10 hands-on ANSYS Fluent projects, giving students and engineers a fast, practical start in heat exchanger CFD. It covers chevron plate, reverse cross flow, and spiral heat exchangers, PCM in finned tubes and shell-and-tube units, baffle cut effects, twisted tape inserts and vortex generators, helical fins, and nanofluid heat transfer in baffled and porous designs. Includes over 3 hours of step-by-step video lessons, English audio with subtitles in six languages, and 15 years of MR CFD expertise for stress-free onboarding.

Price: $8

This study investigates the thermal and fluid dynamics behavior of a pin-fin heat exchanger using CFD simulation. The geometry of the pin-fin heat exchanger was created using ANSYS Design Modeler. The computational domain was then discretized using ANSYS Meshing, resulting in 1,679,530 elements. The pin wall temperature was set to a constant 800 K to simulate a high-temperature heat source

Price: $80

The study investigates Evaporation-Condensation Process in a Porous Heat Exchanger using ANSYS Fluent. The geometry is created in ANSYS Design Modeler, with a mesh of 8,777,268 elements generated using ANSYS Meshing. The simulation employs a pressure-based transient solver with the k-epsilon turbulence model and Volume of Fluid (VOF) multiphase model. It conducts a time-dependent analysis with enabled condensation in mass transfer mechanisms to simulate phase change from vapor to liquid water. Also, the domain is considered to be porous.

Price: $8

This product simulates a shell and plate heat exchanger using ANSYS Fluent software. The geometry of the problem is designed in spaceclaim. Then the Fluent meshing software was used to mesh the geometry producing 3,686,338 polyhedral elements. The turbulence of the flow is simulated via Realizable k-e model.