Heat Exchanger Golden Training Package
Price:
$4,164
$1,319
The Heat Exchanger GOLDEN Training Package delivers over 50 ANSYS Fluent tutorials, transforming teams into experts with instant project readiness. Tailored for professors, CEOs, and firms, it covers plate, shell-and-tube, double pipe, finned tube, spiral, helical, and porous heat exchangers, baffle and insert optimization, nanofluids, PCM thermal storage, evaporation and condensation, sedimentation and erosion, conjugated heat transfer, solar and ground heat exchangers, and paper-validated cases. Includes step-by-step exercises, 1-year support, 3-month HPC, lifetime updates, and 15 years of MR CFD expertise for stress-free onboarding and competitive edge.
Heat Exchanger Golden Training Package
Price:
$4,164
$1,319
The Heat Exchanger GOLDEN Training Package delivers over 50 ANSYS Fluent tutorials, transforming teams into experts with instant project readiness. Tailored for professors, CEOs, and firms, it covers plate, shell-and-tube, double pipe, finned tube, spiral, helical, and porous heat exchangers, baffle and insert optimization, nanofluids, PCM thermal storage, evaporation and condensation, sedimentation and erosion, conjugated heat transfer, solar and ground heat exchangers, and paper-validated cases. Includes step-by-step exercises, 1-year support, 3-month HPC, lifetime updates, and 15 years of MR CFD expertise for stress-free onboarding and competitive edge.
Price: $18
This project aims to evaluate the impact of tube geometry and nanofluid composition on heat transfer performance. Three nanofluid compositions are examined: Alumina/water, MWCNT/water, and a hybrid Alumina-MWCNT/water nanofluid. It explores two geometric configurations: circular and diamond-shaped tubes' effect on heat transfer performance. The turbulence of the flow is simulated by Realizable k-epsilon model. The single phase model is considered to simulate nanoparticle presence in the base fluid.
Price: $24
This project investigates the performance of a tube with twisted tape inserts and vortex generators in ANSYS Fluent. The study focuses on the cooling of hot alumina nanofluid flowing through the inner tube while exposed to external air flow. The geometry was designed in ANSYS Design Modeler and meshed using ANSYS Meshing. The simulation uses a pressure-based solver with the RNG k-ε turbulence model and enabled energy equation for steady-state conditions. The study demonstrates the impact of twisted tape inserts and vortex generators on flow patterns, providing insights into heat transfer enhancement and cooling efficiency.
Rotary Heat Exchanger, Effect of Mass Flow Rate CFD Simulation
Beginner, Intermediate
Price: $12
The problem numerically simulates a Rotary Heat Exchanger, Effect of Mass Flow Rate on heat transfer coefficient in ANSYS Fluent software. The 2D geometry of the model is created in Design Modeler software. The model is meshed in ANSYS Meshing creating 86,598 elements. The Standard k-epsilon model is used to describe turbulency of the flow.
Init Macro, UDF, Initial Temperature CFD Simulation
Intermediate, Advanced
Price: $180
The problem numerically simulates the double-pipe heat exchanger using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. The mesh is Structured, and the element number equals 147,200. We use the User-Defined Function (UDF) to define an initial temperature. We use the INIT Macro for UDF.
Optimization of Shell & Tube Heat Exchanger with Baffle-Cut, Industrial CFD Simulation
Beginner, Intermediate
Price: $180
In this project, an industrial CFD simulation of the Optimization of Shell & Tube Heat Exchanger with Baffle-Cut has been carried out, and the simulation results have been investigated.
Plate Heat Exchanger CFD Simulation, ANSYS CFX
Beginner, Intermediate, Advanced
Price: $100
This problem simulates the Plate Heat Exchanger by ANSYS CFX software. The geometry of the present model is drawn by Design Modeler in 2.5D and then is meshed by ANSYS Meshing software. The cell number equals 5,096,686. Thermal Energy is enabled to capture the temperature. Both Conduction and Convection happen in the domain (Conjugated Heat Transfer (CHT)).
Price: $100
This problem simulates the Plate Heat Exchanger by ANSYS Fluent software. The geometry of the present model is drawn by Design Modeler software and then meshed by ANSYS Meshing software. The cell number equals 2,216,379. Energy Equation is enabled. Both Conduction and Convection happen in the domain (Conjugated Heat Transfer (CHT)).
Price: $120
The present simulation is about Pin and Plate Heatsink Heat Transfer by ANSYS Fluent, and the results of this simulation have been analyzed.
Solar Collector with FMHPA CFD Simulation Training
Intermediate
Price: $24
The present problem simulates Collector with FMHPA using ANSYS Fluent software.
The Heat Exchanger GOLDEN Training Package is MR CFD’s most complete ANSYS Fluent collection for thermal exchanger simulation, with over 50 hands-on tutorials that take you from a first chevron plate model to advanced, publication-level analysis. Built for professors, CEOs, research teams, and engineering firms, it gives your group a ready-to-use project library, so new members become productive quickly and ongoing work starts from proven templates.
Plate and spiral heat exchangers: Simulate chevron, reverse cross flow, 4-layer planar, shell-and-plate, spiral, and planar heat exchangers with mixing tabs. Run conjugated heat transfer (CHT) in plate heat exchangers in both Fluent and ANSYS CFX, and work through a counter and cross flow heat recovery case validated against a paper.
Shell and tube design: Study baffle cut effects, spiral baffles, staggered baffles with paper validation, vertical shell and spiral tube units, shell and helical tube designs, liquid sodium units, and industrial shell-and-tube studies including baffle-cut optimization.
Enhancement techniques and nanofluids: Model twisted tape inserts, vortex generators, twisted barriers, helical fins, and dish-shaped and louvered strip inserts. Compare alumina, MWCNT, and hybrid nanofluids, with circular and diamond-shaped tubes, mixture-model nanofluids, and nanofluid flow through porous heat exchangers.
Finned tube and compact designs: Analyze finned tube, wavy finned, inner finned, and crude oil cooling heat exchangers. Compare elliptical and circular finned tubes with CHT, and evaluate pin-fin, pin and plate heat sinks.
Phase change and multiphase: Simulate PCM in finned tubes and shell-and-tube units, a PCM shell-and-tube thermal storage system with paper validation, and a triplex tube PCM unit with paper validation. Add evaporation-condensation in porous heat exchangers, condensation inside a shell-and-tube condenser, air bubble injection with VOF, and sedimentation and erosion with DPM using the Finnie, Oka, and McLaury models.
Special applications and UDFs: Explore solar heat exchangers with Discrete Ordinates and solar ray tracing, solar collectors, ground heat exchangers in heating and cooling modes, rotary heat exchangers, double pipe, helical, and triple heat exchangers, and UDF Init macros for initial temperature fields.
What’s included:
Step-by-step exercises with complete setup, meshing, solving, and post-processing
Projects spanning beginner, intermediate, and advanced levels, including paper-validation cases
1-year technical support
3-month HPC access
Lifetime updates
Backed by 15 years of MR CFD simulation expertise
Whether you’re preparing a research paper, optimizing an industrial exchanger, or building in-house CFD capability, this package gives you the knowledge, tools, and confidence to deliver faster and stay ahead of the competition.