Asthma Spray Inhaler Injection into the Lung, Ansys Fluent Training
Price: $16
- The problem numerically simulates Asthma Spray Inhaler Injection Into the Lung using ANSYS Fluent software.
- We design the 3-D model by the Design Modeler software.
- We Mesh the model by ANSYS Meshing software, and the element number equals 3734234.
- We perform this simulation as unsteady (Transient).
- We use the Discrete Phase Model (DPM) to define Asthma spray injection into the lung.
Asthma Spray Inhaler Injection into the Lung, Ansys Fluent Training
Price: $16
- The problem numerically simulates Asthma Spray Inhaler Injection Into the Lung using ANSYS Fluent software.
- We design the 3-D model by the Design Modeler software.
- We Mesh the model by ANSYS Meshing software, and the element number equals 3734234.
- We perform this simulation as unsteady (Transient).
- We use the Discrete Phase Model (DPM) to define Asthma spray injection into the lung.
Description
The present problem simulates asthma Spray into the human lungs using ANSYS Fluent software. We perform this CFD project and investigate it by CFD analysis.
The present model is designed in three dimensions using the SpaceClaim software. The geometry of the present model consists of a simple human lung model, and the inlet diameter of the lung is 50cm.
The meshing of the model was done using ANSYS Meshing software. The element number is 3734238.
Also, due to the nature of the problem, the transient solver is enabled.
Asthma Spray Methodology
In this study, Asthma Spray in human lungs was investigated using the one-way DPM (Discrete phase material) method using Ansys Fluent software.
In this simulation, two types of material are used: air and particles that enter the lungs in a Discrete phase material. Trajectories of particles within the lung were observed using Ansys Fluent software.
The air inlet velocity enters the field at 5 m/s with a gravity of -9.81 m/s2 on the z-axis. Also, the particles with a diameter of 100 microns enter the domain using a surface velocity injection. Moreover, the realizable k-epsilon model is used to solve turbulent fluid equations.
Asthma Spray Conclusion
After the solution process is completed, two and three-dimensional contours of velocity and pressure are obtained. In addition, in the extracted animation, we may see the Particle tracks in the lungs.