$
Currency Preference

Currently showing prices in US Dollar
Login
Register

Course Overview

Heat Transfer, Beginner: CFD Simulation Training Course

Section 1
Forced Convection
1. 01
  
  Forced Convection Heat Transfer in U-Bend CFD Simulation
  
  Lesson 1 20m 58s Free
Section 2
Jet Flow Heat Transfer
1. 01
  
  Impinging Jet Heat Transfer on a U-Shaped Plate CFD Simulation
  
  Lesson 1 14m 40s Free
Section 3
Cooling
1. 01
  
  Cross Ventilation for Swamp Cooler Cooling CFD Simulation
  
  Lesson 1 13m 53s
2. 02
  
  Cooling of Airfoil Surface by Lateral Hole Air Inlets CFD Simulation
  
  Lesson 2 12m 4s
Section 4
CHT (Conjugate Heat Transfer)
1. 01
  
  Fin Pipe Radiator Conjugated Heat Transfer CFD Simulation
  
  Lesson 1 13m 40s
Section 5
Heat Sink
1. 01
  
  Heat Sink Cooling CFD Simulation
  
  Lesson 1 16m 29s
2. 02
  
  IGBT Heat Sink Cooling CFD Simulation
  
  Lesson 2 19m 28s
Section 6
Brake Disk
1. 01
  
  Brake Disk Heat Transfer CFD Simulation
  
  Lesson 1 12m 9s
Section 7
Towel Warmer
1. 01
  
  Towel Warmer CFD Simulation
  
  Lesson 1 12m 54s
Section 8
Radiator
1. 01
  
  Radiator Heated by a Solar Panel CFD Simulation
  
  Lesson 1 19m 21s
2. 02
  
  Finned Tube Radiator Heat Transfer CFD Simulation
  
  Lesson 2 15m 46s
Section 9
Heater for HVAC
1. 01
  
  Heater Applied for a Room HVAC CFD Simulation
  
  Lesson 1 17m 11s
2. 02
  
  Single Sided Ventilation in Room Considering a Heater
  
  Lesson 2 27m 3s
Section 10
Cooler for HVAC
1. 01
  
  Swamp Cooler Application for Building HVAC CFD Simulation
  
  Lesson 1 13m 40s
Section 11
Geometry and Mesh Training
1. Single Sided Ventilation in Room Considering a Heater
  
  Lesson 1 12m 58s

Oops! You are not logged in.

For watching this lesson you should sign in first, if you don't have an account, you can create one in seconds.

Toggle Lesson List

Heat Transfer, Beginner: CFD Simulation Training Course — Ep 01

Single Sided Ventilation in Room Considering a Heater

Lesson: 01
Run Time: 12m 58s
Published: Aug 17, 2025
Category: ANSYS Fluent
Course Progress: 0%

Mark as Complete

Add to Watchlist

About This Lesson

The geometry is designed by SpaceClaim and the Mesh is generated by ANSYS Meshing.

Geometry & Mesh Training

Editable Geometry & Mesh

Journal File

Technical Report

Case & Data