MR CFD’s All Courses
Here's every Course from Basic to Advanced, that can boost your skills and career.
Heat Transfer on Serrated Finned Tube, Paper Validation
Beginner, Intermediate
Price: Free
The problem numerically simulates Heat Transfer Over a Serrated Finned Tube using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We Mesh the model with ANSYS Meshing software, and the element number equals 356240. This project is simulated and validated with a reference article.
Open-channel two-phase flow in rough rivers CFD Simulation, ANSYS Fluent
Beginner, Intermediate
Price: $24
This problem simulates open-channel two-phase flow in a rough river using Ansys Fluent software. The 3-D geometry is designed in Design Modeler software. ANSYS Meshing software is used to generate the mesh; the element number equals 839,470. In this project, the two-phase flow is simulated using the VOF model. How water flows over rough river, in this project is well modeled. In this project, open channel flow sub-model has been used. In this project, concept of convergence has been well described.
Lubrication, Piston-Ring Pack Friction (Moving Wall), ANSYS Fluent CFD Simulation Training
Beginner, Intermediate
Price: $100
The present problem simulates the lubrication process effect on friction factor in the space between the cylinder and the ring in an engine considering various groove texture patterns.
Price: $48
The problem numerically simulates a Gas-Liquid Separator using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 356230. We use the VOF Multi-phase model to define Hydrogen-sulfide and Oil in the chamber.
Price: $16
The problem numerically simulates the Fuel Injector using ANSYS Fluent software. We design the 3-D model by the Gambit software. We Mesh the model by Gambit software. The Mesh type is Structured, and the element number equals 932107. We use the Mixture Multi-Phase model to define three phases: air, liquid and vapor.
Price: $16
The problem numerically simulates the discrete phase trap (TRAPPER) using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 420485. We use the Discrete Phase Model (DPM) to define the particle trapping mechanism.
Price: $80
The problem numerically simulates the Air Conditioning of a Room with a Heat Source using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 98924. The Energy Equation is activated to consider heat transfer.
Non-Newtonian Fluid Flow Between Two Moving Eccentric Cylinders
Beginner, Intermediate
Price: $32
The problem numerically simulates the non-newtonian fluid flow inside Two Moving Eccentric Cylinders using ANSYS Fluent software. We design the 3-D model with the Gambit software. The mesh type is structured, and the element number equals 179,820. low-Re correction is activated to capture the flow patterns The Eulerian Model is used for simulating multiphase behavior. The fluid type is set as Non-Newtonian. The inner cylinder will start to rotate by applying the Moving Wall option.
Ejector Two-Phase Flow CFD Simulation, ANSYS Fluent
Beginner, Intermediate
Price: $20
In this project, a two-phase flow of vapor and liquid ammonia in a two-phase ejector has been simulated by ANSYS Fluent software.