MR CFD’s All Courses

Price: $160

The present simulation investigates the air conditioning system of a computer room by ANSYS Fluent software We have designed the geometry using ANSYS Design modeler software and created the mesh on this geometry using ANSYS meshing software. The mesh type is unstructured with 3089035 cells. Floor Heating and Ceiling Cooling methods are applied for the HVAC. In these systems, the buoyancy effect causes free heat transfer inside the office space. Considering Radiation, DPM, and heat sources.

Price: $16

In the windcatcher project, we have simulated a Windcatcher using ANSYS Fluent software as a Passive Ventilation system. Three-dimensional windcatcher modeling was done using Design Modeler software. The model meshing has been done using ANSYS Meshing software, and the element number is 2332185.

Price: $20

Solidification & Melting in a gasoline fuel tank is simulated by ANSYS Fluent. The geometry of the present model is drawn by Design Modeler software. The model is then meshed by ANSYS Meshing software, and the total number of cells is equal to 511821. The simulation is Transient.

Price: $96

The present study examined blood flow in capillaries passing through a tissue containing cancerous tumors using Hyperthermia Therapy by ANSYS Fluent software. We have designed the geometry using ANSYS Design modeler software and created the mesh on this geometry using ANSYS meshing software. The mesh type is unstructured with 717087 cells. The whole tissue can be considered a porous medium. This simulation is performed as unsteady (Transient). The Source Term option is used. The UDF code defines the amount of heat applied per volume unit.

Price: $20

The present problem deals with the flow of water vapor as the primary fluid and the secondary fluid within a steam ejector by ANSYS Fluent software. We design the present 2-D model by the Design Modeler software. Meshing was performed by ANSYS Meshing software. The mesh type is structured, and the element number equals 51990. We have used a density-based solver due to the compressibility in this project.

Price: $28

The present study investigates the airflow passing over a 3-blade horizontal axis wind turbine (HAWT) by ANSYS Fluent software. The present 3-D model was designed by SOLIDWORKS software and imported to Design Modeler software. The meshing of the model has been done using ANSYS Meshing software. The mesh type is structured, and the element number is 4270222. The present simulation aims to investigate the effect of wind flow on the turbine blades and calculate the Drag and Lift forces applied to the blade surfaces. Using the Frame Motion (MRF) method.

Price: $220

In this product, a spray dryer is simulated by ANSYS Fluent software. The geometry of this project has been designed using Desing Modeler software The mesh was created on this geometry using ANSYS Meshing software. The element number is 84047. We have used the Species Transport Model in this simulation. The hot airflow, is responsible for evaporating the moisture in the solution.

Price: $48

This product is a gas cyclone device CFD simulation by ANSYS Fluent software. Due to the centrifugal force and heavier weight, particles separate from the gas stream and move downward due to gravitational force. Design Modeler software models the current 3-D geometry. ANSYS Meshing software grid the present model. The element number is 142499. the solid particles enter the cyclone interior from the top as the discrete phase, applying the Discrete Phase Model (DPM). We also define the discrete phase injection as the INERT of the cyclone inlet.

Price: $32

In this project, a combustion chamber is simulated by ANSYS Fluent software applying a Transient and Pressure-based solver, considering the gravity effect. The geometry of the present model is 3-D, and Design Modeler software designs it. ANSYS Meshing software performs the meshing of the current model. The element number is equal to 694928. The Species Transport Model is activated to model the combustion.