MR CFD’s All Courses
Here's every Course from Basic to Advanced, that can boost your skills and career.
NACA 0012 Airfoil, Compressible Flow CFD Simulation
Beginner, Intermediate
Price: $20
The problem numerically simulates NACA 0012 Airfoil (Compressible Flow) using ANSYS Fluent software. We design the 2-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing. The model mesh is structured, and 35000 cells have been created. We apply a Density-based solver to define the compressible flow. We determine the Mach number for the inlet boundary condition.
Price: $20
The problem numerically simulates Airflow on the Dimpled Rotating Cylinder using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 1064903. We use the Frame Motion method to define the rotational movement.
Eulerian Two Phase Flow in a Moving Wall Cylinder, ANSYS Fluent Tutorial
Beginner, Intermediate
Price: $16
The problem numerically simulates Eulerian Two-Phase Flow in a Moving Wall Cylinder using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 11880. We use the Eulerian multiphase model to define two-phase flow including water and air. We apply rotational velocity for the inner wall as Moving Wall.
Oscillatory Wave and its Effect on Fin Motion, ANSYS Fluent CFD Training
Intermediate, Advanced
Price: $99
The problem numerically simulates the Rotational Motion of a Fin under the influence of Oscillatory Wave flow using ANSYS Fluent software. We design the 2-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 120049. We perform this simulation as unsteady (Transient). We use the two-phase VOF model to define the flow field containing the water and air. We use Dynamics Mesh to define deformation of the grid around the moving wall. We determine only one degree of freedom (1-DOF) to rotate the fin. We use a UDF to define the reciprocating motion of the wall that causes the wavy flow.
Price: $16
The problem numerically simulates an Injector using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 102752. We use the VOF Multi-Phase model to define water and air in an injector.
Price: $240
The problem numerically simulates the surface evaporation of a falling water droplet using ANSYS Fluent software. We design the 2-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software. The mesh type is Structured, and the element number equals 94800. We perform this simulation as unsteady (Transient). We use the Mixture Multi-Phase Model to define droplets inside the air. We use a UDF to define surface evaporation as the Mass Transfer rate between water and air.
Bluff-Body Mild Burner CFD Simulation
Intermediate
Price: $66
This project is the CFD simulation of combustion in a bluff body mild burner.
Magnetic Force Effect on an Airfoil CFD Simulation, ANSYS Fluent Tutorial
Intermediate, Advanced
Price: $36
The problem numerically simulates Magnetic Force Effect on NACA 0015 airfoil using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software. We use the MHD model to consider the magnetic force effect on the flow.
Price: $16
The present problem is concerned with the simulation of a spiral heat exchanger.