MR CFD’s All Courses
Here's every Course from Basic to Advanced, that can boost your skills and career.
Heat Exchanger with Baffle Cut and Mixture Nano Fluid
Beginner, Intermediate
Price: $28
A Shell and tube heat exchanger applying a Nanofluid is simulated by ANSYS Fluent software. 3-D Geometry is designed by Design Modeler software. The Heat exchanger was designed with a volume of 450,980 elements by ANSYS Meshing software. In order to model the Nano Fluid, a multi-phase model using the Mixture method was used.
Pollution in a Real Urban Zone, ANSYS Fluent CFD Simulation Training
Beginner, Intermediate
Price: $20
The problem simulates a mass fraction of carbon dioxide changes as the pollutant in an urban street by ANSYS Fluent software. The present model is three-dimensional and is drawn using the Design Modeler software. The meshing is done using ANSYS Meshing software. The element number is 4137570. Simulation using the Species Transport solves a Transport Equation for each component of the pollution mixture. The simulation is Transient since the goal is to study changes in carbon dioxide concentration over time.
Price: $24
The present problem simulates the flow of water through a spillway by ANSYS Fluent software. The 3-D geometry of the present model is designed using Design Modeler software. The meshing of the model has been done using ANSYS Meshing software and the element number is 698691. The Transient solver is applied. To define the two-phase flow in this simulation, a Multiphase VOF (volume of fluid) model is used, considering the Free Surface model.
Shell and Tube Heat Exchanger, Helical Fin, NanoFluid
Beginner, Intermediate
Price: $28
In this project, we simulate a Shell & Tube Heat Exchanger with Helical Fin considering NanoFluid, by ANSYS Fluent software. The 3-D geometry of shell and tube heat exchanger considering a helical tape is designed and meshed by Design modeler and ANSYS Meshing software, respectively. The nano-fluid is modeled by applying multiphase flow (Mixture method).
PCM in Shell and Tube Finned Heat Exchanger CFD Simulation
Beginner, Intermediate
Price: $24
Performance of Phase Change Material (PCM) inside a shell and tube-finned heat exchanger by ANSYS Fluent software. The current model is designed in three dimensions using Design Modeler software. The meshing of the present model has been done using ANSYS Meshing software. The mesh type is structured, and the element number is 2989887. The phase change material is paraffin, so the solidification and melting model has been used. The simulation is Unsteady in terms of time.
Price: $390
The present problem simulates the gasification process inside a gasifier chamber by ANSYS Fluent. The present 3-D model is designed using Design Modeler software. The meshing of the model has been done using ANSYS Meshing software. The element number is 219170. Water vapor is created by the process of evaporation of water droplets inside the chamber by applying DPM. The species transport model with volumetric reactions has been used and to define the type of reactants and the process of chemical reactions. The CHEMKIN mechanism has been used, which includes 5 chemical reactions involving 8 different types of reactants and products. This model also assumes that Radiation heat transfer due to chemical reactions occurs inside the gasifier chamber, and hence, the P1 model is defined for simulation.
Price: $16
The present problem deals with the hydrodynamic simulation of a gas sweetening system using ANSYS Fluent software. The present model is designed in three dimensions using Design Modeler software. We carry out the model's meshing using ANSYS Meshing software. The element number is 2168649. A multiphase model of the VOF type has been used to define the two-phase of sour gas and an amine stream.
Price: $24
The present problem simulates the water flow inside a Francis water turbine by ANSYS Fluent software. The geometry is designed using Design Modeler software. The meshing of the model has been done using ANSYS Meshing software and the element number is 4653160. Frame motion (MRF) is used to define the rotation of the blades inside the chamber.
Gas Turbine Combustion Chamber 2-D CFD Simulation
Intermediate
Price: $28
In this project, methane-air fuel mixture combustion inside a gas turbine combustion chamber is simulated by ANSYS Fluent software. The geometry required for this analysis, which includes only the gas turbine injector part, is designed in ANSYS Design Modeler and mesh inside ANSYS Meshing. The mesh type used for this geometry is structured and the element number is 197006. the species transport model is used to analyze the combustion process by applying the Eddy Dissipation method. Simulation is done using a density-based solver.