MR CFD’s All Courses

Price: $20

The project utilized the ANSYS software suite to simulate and analyze the fluid behavior and cavitation characteristics under specific operating conditions. The initial phase of the project involved geometry creation using ANSYS Design Modeler, followed by mesh generation in ANSYS Meshing. The multiphase modeling approach utilized the Volume of Fluid (VOF) method, coupled with cavitation mechanisms to accurately represent the two-phase flow dynamics

Price: $439

This product numerically simulates the Battery Module Pack using ANSYS Fluent software. We design the 3-D model in parallel and serial connection with the Design Modeler software. We mesh the model with ANSYS Meshing software; the element numbers are 269562. We use the Circuit Network Battery model to define the charge/discharge. We use the ECM (Equivalent Circuit Model) sub-model to determine the electrochemical computations. We use the Pack Builder to define the battery module pack. The run calculation is in an unsteady state (transient).

Price: $24

This report presents a simulation examining how particle presence affects the friction force on the walls of two concentric cylinders using the Discrete Phase Method (DPM). The geometry of the two concentric cylinders was created using ANSYS SpaceClaim software. A high-quality mesh of 51840 hexahedral elements was generated using ANSYS Meshing software. Appropriate DPM settings were applied and the friction force exerted on the two cylinder walls was calculated.

Price: $108

This report presents the results of a CFD analysis performed on a tilt-rotor drone using ANSYS Fluent with mesh motion capabilities for the arms and propellers. The geometry of the Drone was created using ANSYS SpaceClaim software. A high-quality non-conformal un-structured mesh was generated using ANSYS Meshing software. Applied Mesh motion for both arms and propellers

Price: $439

This product numerically simulates the Cylindrical Battery Pack using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, element numbers are 485797. We use a Virtual Connection to define a battery pack without designing busbars. We use the MSMD (Multi-Scale Multi-Domain) Battery model to define the charge/discharge. We use the ECM (Equivalent Circuit Model) sub-model to determine the electrochemical computations. The run calculation is in an unsteady state (transient).

Price: $639

The “UDF: All Levels” CFD simulation training course by ANSYS Fluent is an in-depth program designed to master User-Defined Functions (UDFs) in ANSYS Fluent software. Covering ten chapters, from basic concepts to advanced applications, the course teaches participants how to customize and enhance CFD simulations. Through practical examples, students learn to implement various UDF macros for complex fluid dynamics scenarios, enabling them to extend ANSYS Fluent’s capabilities and solve challenging problems with greater flexibility and precision.

Price: $1,589

The “Fuel Cell: All Levels” CFD simulation training course by ANSYS Fluent offers a comprehensive journey through fuel cell modeling using advanced CFD techniques. Starting with fundamental concepts, the course progresses through various fuel cell types and configurations, including serpentine and radial PEMFCs, PEMFC stacks, and SOFCs with cooling systems and unresolved electrolytes. Participants gain hands-on experience in using ANSYS Fluent for fuel cell design optimization and performance analysis, applicable to diverse industrial and research scenarios.

Price: $1,629

Master electrolysis simulation with our “Electrolysis: All Levels” CFD course using ANSYS Fluent. From basics to advanced multiphysics, learn to model electrolytic cells, electrode kinetics, and bubble dynamics. Covering applications from water splitting to industrial electrorefining, this course equips you with essential skills for optimizing electrochemical processes through CFD. Ideal for beginners and experts alike, enhance your capabilities in electrochemistry and fluid dynamics simulation for cutting-edge research and industrial applications.

Price: $379

This product numerically simulates the 4S6P Battery Pack using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, the element numbers are 499001. We use the MSMD (Multi-Scale Multi-Domain) Battery model to define the charge/discharge. We use the ECM (Equivalent Circuit Model) sub-model to determine the electrochemical computations. The run calculation is in an unsteady state (transient).