MR CFD’s All Courses

Price: $15

This project simulates the Fluid-Structure Interaction (FSI) of a high-speed airfoil using ANSYS Fluent software. The airfoil geometry is designed in ANSYS Design Modeler. ANSYS Meshing is used to generate a high-quality mesh with 2,398,833 elements. In this study, the complex flow behavior and structural response of the airfoil are simulated using a pressure-based transient solver and the Realizable k-epsilon turbulence model. The pressure distribution, velocity patterns, and airfoil displacement under high-speed conditions are well modeled in this project.

Price: $100

This problem simulates Adhesion effect on a self-cleaning material (porous)using Ansys Fluent software. The 2-D geometry is designed in Design Modeler software. Ansys Meshing software is used to generate the mesh; the element number equals 105,000. In this project, the Hydrophilicity and hydrophobicity of surfaces is simulated using the VOF How the flow pattern near a hydrophobic surface and near a hydrophobic surface is well modeled in this project.

Price: $4

This report presents a comprehensive CFD analysis of a Gas Turbine Intake using ANSYS Fluent. The study investigates flow behavior and pressure characteristics within a complex intake geometry, utilizing a structured mesh of 1,494,720 elements. The simulation employs a pressure-based, steady-state solver with the Realizable k-epsilon turbulence model. Key results include velocity magnitude contours, pressure distribution, and turbulence kinetic energy patterns throughout the intake system. An area-weighted average pressure of 320.84187 Pa at the inlet offers quantitative data on entrance conditions.

Price: $8

This product simulates a shell and plate heat exchanger using ANSYS Fluent software. The geometry of the problem is designed in spaceclaim. Then the Fluent meshing software was used to mesh the geometry producing 3,686,338 polyhedral elements. The turbulence of the flow is simulated via Realizable k-e model.

Price: $28

The problem numerically simulates one-step non-premixed hydrogen combustion with integration of the Sutherland viscosity and kinetic theory of thermal conductivity using ANSYS Fluent software. We design the 3-D model with the Spaceclaim software. We mesh the model with ANSYS Meshing software. The mesh type is Structured We use the Species Transport model to define a Combustion reaction. The combination of Sutherland viscosity and kinetic theory for thermal conductivity is presented for the accurate simulation of the combustion process. The standard k-e turbulence model is used to simulate the turbulence.

Price: $219

This study aims to investigate the aerodynamic performance of a Grumman RQ-4 Global Hawk using ANSYS Fluent. The Global Hawk geometry was modelled using SpaceClaim then imported into ANSYS Fluent for meshing consisting 3,764,695 elements. The simulation used a pressure-based solver.

Price: $10

The problem numerically simulates multiphase flow in a venturi nozzle using ANSYS Fluent software. The geometry is designed in ANSYS Design Modeler and ANSYS Meshing is used to generate a mesh with 829,367 cells. The Volume of Fluid (VOF) multiphase model is employed to handle the interaction between air and water phases. The Realizable k-epsilon turbulence model with Enhanced Wall Treatment is used to simulate turbulent flow. Results are analyzed for air volume fraction, pressure distribution, and velocity patterns throughout the venturi turbine geometry.

Price: $14

This study investigates the effects of energy dissipation blocks on the energy dissipation efficiency of stepped spillways using computational fluid dynamics (CFD) simulations. Two spillway configurations, with and without blocks, were analyzed under different flow conditions. The results showed that the presence of blocks enhanced energy dissipation by 6% compared to the conventional stepped spillway design. These findings contribute to the optimization of stepped spillway designs for improved energy dissipation and downstream channel protection.

Price: $16

In this project, a part of an annular combustion chamber is simulated by Ansys Fluent software. Premixed combustion of methane-air is ​​analyzed, and Zimont's method is also used to model the flame speed. Structured grid is used to create a mesh in the computing domain.