Academic Online Courses
Here, you can easily find your desired tutorial similar to your project topics. These learning products contain many engineering fields, flow regimes, and all ANSYS Fluent modules.
Price: $420
Investigates transient thermal behavior and multiphase flow dynamics within a solar still system. Features a multi-layered domain modeled in SpaceClaim and discretized with 3.3 million tetrahedral elements. Utilizes ANSYS Fluent's transient Eulerian multiphase solver, UDF-based phase change, and discrete ordinates radiation. Accurately captures temporal temperature gradients, paraffin wax melting fractions, and water vaporization dynamics.
ANSYS Structural Concepts: Boundary Conditions
Beginner, Intermediate, Advanced
Price: Free
Introduction to the Structural Simulations Introduction to the Boundary Conditions definition in ANSYS Structural Introduction to the Loads category Introduction to the Supports category Introduction to the Inertial category
Price: $210
This product numerically simulates a T-Junction using ANSYS software. This project is implemented as a Fluid-Structure Interaction (FSI) in thermal and mechanical approaches. We perform the Fluid simulation in ANSYS Fluent and the Thermal simulation in ANSYS Steady-State Thermal. We perform the Solid simulation in ANSYS Static Structural. We use a One-Way FSI for data transfer from Fluent and Steady-State Thermal to Static Structural. We design the 3-D model in the Design Modeler software and mesh it in the ANSYS Meshing software.
Pelton Turbine, Acoustic Analysis, ANSYS Fluent CFD Simulation
Intermediate, Advanced
Price: $54
This product numerically simulates a Pelton Turbine under Acoustic analysis using ANSYS Fluent software. We design the 3D model with Design Modeler software. We mesh the model with ANSYS Meshing software. We use the Broadband Noise Source method to define an Acoustic model. We use the Frame Motion to define a rotational flow.
Price: $315
This project studies friction welding of two stainless-steel rods using Ansys Workbench. A coupled transient thermal and structural analysis was used to simulate heating, upsetting, and deformation. The model includes frictional contact, temperature-dependent material properties, and staged loading conditions. The results show strong temperature and stress concentration at the welding interface.
Price: $649
The problem numerically simulates an AAI RQ_7 Shadow UAV using ANSYS Fluent software. We design the 3-D model with the SpaceClaim software. We mesh the model with Ansys Meshing software. The element number equals 3,587,540 and their type is Tetrahedral. In this simulation, Dynamic Mesh is used for FSI modeling.
Particle Stickiness in a Bend Pipe CFD Simulation
Intermediate, Advanced
Price: $10
This report presents a simulation of the particle stickiness in a bend pipe using Discrete Phase Method (DPM). The geometry of the bend pipe was created using ANSYS SpaceClaim software. A high-quality mesh of 1,664,000 hexahedral elements was generated using ANSYS Meshing software. Appropriate DPM settings were applied and the particle accretion rate was calculated on the bend pipe wall.
Price: $8
This project simulates a Miner Room Ventilation in ANSYS Fluent software. The geometry of the problem is designed in Spaceclaim then Meshed in ANSYS Meshing software with 1,530,586 cells. The turbulence of the air flow is simulated with RNG k-e model. The energy source in cell zone conditions is activated for the fans.
Arc Welding
Beginner, Intermediate, Advanced
Price: $210
Arc welding process simulated using ANSYS Fluent User-Defined Scalar (UDS) calculates electrical potential/properties User-Defined Function (UDF) computes electric field heat release, added as an energy equation source term Geometry built in SpaceClaim Mesh of 335,560 elements generated in ANSYS Meshing