Academic Online Courses
Here's every CFD online course related to Academic category.
Price: $270
This product numerically simulates a T-junction deformation using ANSYS Fluent software. This project is implemented as a Thermal Fluid-Structure Interaction (FSI) approach. We design the 3-D model in the Design Modeler software and mesh it in the ANSYS Meshing software. We use the Structure Model to consider the computation between the fluid and the structure. We use the Linear Elasticity method to define the solid deformation. We use the Dynamic Mesh tool to account for fluid domain deformation. The run calculation is in an Unsteady State (transient).
Price: $120
This study examines the aerodynamic behavior around a scaled model of Burj Jeddah. The tower geometry was modeled in ANSYS SpaceClaim, with a length of about 7 m, and discretized using a tetrahedral mesh of approximately 2.5 million cells. A pressure-based steady-state CFD simulation was performed using the standard -turbulence model and a 10 m/s velocity inlet. The results show the flow field around the tower and the resulting structural displacement due to wind loading.
Price: $809
The problem numerically simulates a RQ-4 UAV using ANSYS Fluent software. We design the 3-D model with the SpaceClaim software. We mesh the model with Ansys Meshing software. The element number equals 11,364,707 and their type is Tetrahedral. In this simulation, FW_H and BroadBand Noise are used for acoustic modeling.
Price: $809
The problem numerically simulates a VTOL UAV using ANSYS Fluent software. We design the 3-D model with the SpaceClaim software. We mesh the model with Ansys Meshing software. The element number equals 4,420,514 and their type is Tetrahedral. In this simulation, Forced oscillation are used for Stability Derivative modeling.
Price: $240
This product numerically simulates a Turbine Gas Blade deformation using ANSYS Fluent software. This project is implemented as a Thermal Fluid-Structure Interaction (FSI) approach. We design the 3-D model in the Design Modeler software and mesh it in the ANSYS Meshing software. We use the Structure Model to consider the computation between the fluid and the structure. We use the Linear Elasticity method to define the solid deformation.
Price: $809
The problem numerically simulates a RQ-4 UAV using ANSYS Fluent software. We design the 3-D model with the SpaceClaim software. We mesh the model with Ansys Meshing software. The element number equals 9,730,964 and their type is Tetrahedral. In this simulation, Forced oscillation are used for Stability Derivative modeling.
Price: $330
This product numerically simulates a Bent Pipe deformation using ANSYS Fluent software. This project is implemented as a Thermal Fluid-Structure Interaction (FSI) approach. We design the 3-D model in the Design Modeler software and mesh it in the ANSYS Meshing software. We use the Structure Model to consider the computation between the fluid and the structure. We use the Linear Elasticity method to define the solid deformation. We use the Dynamic Mesh tool to account for fluid domain deformation. The run calculation is in an Unsteady State (transient).
Solar Chimney, Radiation Model, Paper Numerical Validation, ANSYS Fluent
Intermediate, Advanced
Price: $180
This project numerically simulates the Solar Chimney using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. We use the Discrete Ordinates (DO) Radiation Model to define the radiation heat transfer. We use the Solar Ray Tracing to define the solar irradiation. The present CFD work is Validated with a reference Article.
Price: $210
This product numerically simulates a T-Junction using ANSYS software. This project is implemented as a Fluid-Structure Interaction (FSI) in thermal and mechanical approaches. We perform the Fluid simulation in ANSYS Fluent and the Thermal simulation in ANSYS Steady-State Thermal. We perform the Solid simulation in ANSYS Static Structural. We use a One-Way FSI for data transfer from Fluent and Steady-State Thermal to Static Structural. We design the 3-D model in the Design Modeler software and mesh it in the ANSYS Meshing software.