Academic Online Courses
Here's every CFD online course related to Academic category.
Dynamic Mesh Concepts in ANSYS Fluent
Beginner, Intermediate, Advanced
Price: Free
Introduction to Dynamic Mesh Model in ANSYS Fluent software Introduction to Mesh Update Methods (Smoothing, Layering, Remeshing) Introduction to Options (In-Cylinder, Six DOF, Implicit Update, Contact Detection) Introduction to Dynamic Mesh Zones (Stationary, Rigid Body, Deforming, User-Defined, System Coupling)
Boat Propeller Cavitation
Beginner, Intermediate, Advanced
Price: $40
This tutorial simulates cavitation on a boat propeller using ANSYS Fluent. It applies the Mixture multiphase model with the Schnerr-Sauer cavitation model and mesh motion for the rotating propeller, and examines how pressure distribution and rotational speed drive vapor formation on the blades.
Price: $200
In this project, Boiling Phenomenon to investigate three-volume fraction discretization methods has been simulated and the results of this simulation have been investigated.
Two-Blade Savonius Wind Turbine: 3-D
Beginner, Intermediate, Advanced
Price: $48
This project uses ANSYS Fluent to numerically simulate a Savonius (two-blade) wind turbine. The 3D model is built in SpaceClaim. The model is meshed in ANSYS Meshing, with an element count of 494,456. The simulation is run as unsteady (transient). The Mesh Motion model is used to define the rotational motion.
Two-Blade Savonius Wind Turbine: 2-D
Beginner, Intermediate, Advanced
Price: $42
This project uses ANSYS Fluent to numerically simulate a Savonius vertical axis wind turbine. The 2D model is built in Design Modeler. The model is meshed in ANSYS Meshing, with an element count of 58,468. The simulation is run as unsteady (transient). The Mesh Motion model is used to define the rotational motion.
Wind Driven Rain (1-way Vs. 2-way) DPM, Ansys Fluent CFD Simulation Training
Intermediate, Advanced
Price: $100
In this project, wind-driven rain has been simulated, and the results of this simulation have been investigated.
Price: $48
Using Multi-Fluid VOF (Eulerian-based) approach with three phases (air, water, and oil). Explanation and comparison of different Eulerian approaches, selecting the most suitable model for this simulation. Turbulent viscous modeling for capturing high-velocity jet behavior and interface instabilities. Discussion of explicit and implicit formulations, highlighting their numerical stability and accuracy in transient multiphase simulations.
Serrated Vs. Plain Airfoil: Darrieus VAWT
Beginner, Intermediate, Advanced
Price: $72
This project uses ANSYS Fluent to numerically simulate and compare a serrated-airfoil and a plain-airfoil turbine. The 3D model is built in Design Modeler. The model is meshed in ANSYS Meshing, with an element count of 1,186,185. The simulation is run as unsteady (transient). The rotating motion of the turbine blades is defined using the Mesh Motion option.
Helical Blade Wind Turbine: 5 different RPMs
Beginner, Intermediate, Advanced
Price: $220
This project uses ANSYS Fluent to numerically simulate a helical-blade vertical axis wind turbine. The project investigates the tip speed ratio (TSR) across different blade rotational speeds. The 3D model is built in Design Modeler. The model is meshed in ANSYS Meshing, with a polyhedral element count of 507,457. The simulation is run as unsteady (transient). The Mesh Motion method is used to define the rotational motion in a distinct zone around the blades.