ANSYS Fluent Online Courses

Price: $330

This project investigates the combustion process in a cylindrical chamber with a porous medium using CFD analysis in ANSYS Fluent. The geometry was designed in ANSYS Design Modeler and meshed using ANSYS Meshing, resulting in a high-quality mesh with 815,135 elements. The simulation employs the RNG k-ε turbulence model, Discrete Ordinate (DO) radiation model, and Species Transport model with Volumetric Reactions. Additional submodels for NOx and Soot formation are included. A cylindrical porous zone with 0.5 fluid porosity is incorporated near the inlet. The study demonstrates the impact of the porous medium on flow patterns, temperature distribution, species concentrations, and pollutant formation.

Price: $64

This project investigates turbocharger performance using CFD analysis in ANSYS Fluent, focusing on the fluid flow and thermal behavior of air through a one-sixth periodic sector of the geometry. The geometry was prepared using Vista CCD and BladeGen, and the mesh was generated with TurboGrid as a structured grid containing 972,176 cells. A pressure-based solver with the SST k-ω, k-ω turbulence model was used, and blade rotation was simulated at 92,000 RPM with the Frame Motion approach. The results highlight the influence of geometry on flow patterns, pressure distribution, and temperature gradients, offering insight into compression efficiency and overall turbocharger performance.

Price: $24

This project investigates the performance of a tube with twisted tape inserts and vortex generators in ANSYS Fluent. The study focuses on the cooling of hot alumina nanofluid flowing through the inner tube while exposed to external air flow. The geometry was designed in ANSYS Design Modeler and meshed using ANSYS Meshing. The simulation uses a pressure-based solver with the RNG k-ε turbulence model and enabled energy equation for steady-state conditions. The study demonstrates the impact of twisted tape inserts and vortex generators on flow patterns, providing insights into heat transfer enhancement and cooling efficiency.

Price: $8

This project investigates the steel valve Thermal and Hydraulic performance through CFD analysis in ANSYS Fluent. The study focuses on the cooling of hot water (400K) flowing through the valve while exposed to external air convection (300K). The geometry was designed in ANSYS Design Modeler and meshed using ANSYS Meshing, resulting in a mesh of 2,237,861 elements. The simulation uses a pressure-based solver with the RNG k-ε turbulence model and enabled energy equation for steady-state conditions. The study demonstrates the impact of valve geometry on flow patterns, pressure distribution, and temperature gradients, providing insights into heat transfer and cooling efficiency.

Price: $8

This project investigates the thermal performance enhancement of a heat sink through CFD analysis in ANSYS Fluent. The study focuses on a heat sink design featuring cylindrical pin fins with splitter plates. The geometry was designed in ANSYS Design Modeler and meshed using ANSYS Meshing, resulting in a structured mesh of 804,434 elements. The study demonstrates the impact of splitter plates on flow patterns and heat transfer, potentially improving overall cooling efficiency.

Price: $14

This project investigates the aerodynamic performance enhancement of an airfoil through CFD analysis in ANSYS Fluent. Three configurations are studied: a clean airfoil, an airfoil with a slat, and an airfoil with both slat and flap. The geometry was designed in ANSYS Design Modeler and meshed using ANSYS Meshing, resulting in approximately 5 million elements. The simulations use a density-based solver to account for compressibility effects. The study demonstrates significant improvements in lift-to-drag ratio, particularly when both slat and flap are employed.

Price: $100

This problem simulates Cooling of two parallel cylindrical micro-tubes using Ansys Fluent software. The 2-D geometry is designed in Design Modeler software. ANSYS Meshing software is used to generate the mesh; the element number equals 40,613. In this project, the Cooling by water flow is simulated using the VOF How water flows and reduces the temperature of the tube wall, in this project is well modeled.

Price: $63

In this project, generation of sound by displacing of speaker diaphragm is modeled using ANSYS Fluent. The geometry was created in SpaceClaim, and a mesh consisting of 687,500 elements was generated using ANSYS Meshing. Dynamic mesh used to model the movement of diaphragm during simulation. In this project we are going to analyze and see how a speaker can generate a specific sound wave.

Price: $20

In this project, the explosion of TNT, with all its complexities, was modeled using ANSYS Fluent. Explosion starts with a fast decomposition reaction that increase the temperature and pressure suddenly that follow by a series of pressure waves. The geometry was created in SpaceClaim, and a mesh consisting of 2,673,750. elements was generated using ANSYS Meshing. The animation of pressure in domain presented and compression wave speed is calculated.