ANSYS Fluent Online Courses

Price: $28

The present study investigates the airflow passing over a 3-blade horizontal axis wind turbine (HAWT) by ANSYS Fluent software. The present 3-D model was designed by SOLIDWORKS software and imported to Design Modeler software. The meshing of the model has been done using ANSYS Meshing software. The mesh type is structured, and the element number is 4270222. The present simulation aims to investigate the effect of wind flow on the turbine blades and calculate the Drag and Lift forces applied to the blade surfaces. Using the Frame Motion (MRF) method.

Price: $220

In this product, a spray dryer is simulated by ANSYS Fluent software. The geometry of this project has been designed using Desing Modeler software The mesh was created on this geometry using ANSYS Meshing software. The element number is 84047. We have used the Species Transport Model in this simulation. The hot airflow, is responsible for evaporating the moisture in the solution.

Price: $48

This product is a gas cyclone device CFD simulation by ANSYS Fluent software. Due to the centrifugal force and heavier weight, particles separate from the gas stream and move downward due to gravitational force. Design Modeler software models the current 3-D geometry. ANSYS Meshing software grid the present model. The element number is 142499. the solid particles enter the cyclone interior from the top as the discrete phase, applying the Discrete Phase Model (DPM). We also define the discrete phase injection as the INERT of the cyclone inlet.

Price: $32

In this project, a combustion chamber is simulated by ANSYS Fluent software applying a Transient and Pressure-based solver, considering the gravity effect. The geometry of the present model is 3-D, and Design Modeler software designs it. ANSYS Meshing software performs the meshing of the current model. The element number is equal to 694928. The Species Transport Model is activated to model the combustion.

Price: $16

In this project, we have simulated a solar chimney using ANSYS Fluent software. air suck upward to the top of the chimney due to the buoyancy force, thereby discharging warm air through the chimney. Three-dimensional solar chimney modeling was done using Design Modeler software. The meshing is carried out by ANSYS Meshing software. The mesh type is a structured type, and the element number equals 106323. We have activated the energy equation to consider heat transfer in this simulation.

Price: $28

This problem simulates the HVAC of an operating room by ANSYS Fluent software. A linear flow called an air curtain prevents contaminated flow into the fresh air, as an HVAC system. The geometry of the present model is drawn by Design Modeler software. The model is then meshed by ANSYS Meshing software. The element number is equal to 4137570. The Species Transport model is used to analyze the behavior of different species.