CFD Online Courses

Price: $8

This project investigates the thermal performance enhancement of a heat sink through CFD analysis in ANSYS Fluent. The study focuses on a heat sink design featuring cylindrical pin fins with splitter plates. The geometry was designed in ANSYS Design Modeler and meshed using ANSYS Meshing, resulting in a structured mesh of 804,434 elements. The study demonstrates the impact of splitter plates on flow patterns and heat transfer, potentially improving overall cooling efficiency.

Price: $14

This project investigates the aerodynamic performance enhancement of an airfoil through CFD analysis in ANSYS Fluent. Three configurations are studied: a clean airfoil, an airfoil with a slat, and an airfoil with both slat and flap. The geometry was designed in ANSYS Design Modeler and meshed using ANSYS Meshing, resulting in approximately 5 million elements. The simulations use a density-based solver to account for compressibility effects. The study demonstrates significant improvements in lift-to-drag ratio, particularly when both slat and flap are employed.

Price: $20

In this project, the explosion of TNT, with all its complexities, was modeled using ANSYS Fluent. Explosion starts with a fast decomposition reaction that increase the temperature and pressure suddenly that follow by a series of pressure waves. The geometry was created in SpaceClaim, and a mesh consisting of 2,673,750. elements was generated using ANSYS Meshing. The animation of pressure in domain presented and compression wave speed is calculated.

Price: $16

The present problem simulates a Six Blade Stirring Mixer using ANSYS Fluent software. We have designed the geometry using DesignModeler software and created the mesh on this geometry using ANSYS Meshing software. The mesh type is unstructured with 5,447,852 cells. The Mixture multiphase model has been used to simulate the present model. The Multiple Reference Frames (MRF) model is used to simulate the motion of impeller. The solution is steady, and the k-Ꜫ model is chosen to simulate the turbulence of the flow.

Price: $160

In this project, fire of a fuel tank caused by fuel leakage is modeled using ANSYS Fluent. The geometry was created in SpaceClaim, and a mesh consisting of 1,262,049 elements was generated using ANSYS Meshing. The effect of blowing wind on the temperature of the room 10m away from this tank is investigated.

Price: $140

The problem numerically simulates Evaluation of NO and Soot Emissions from Wood Gas Flare using ANSYS Fluent software. We design the 3-D model with the SpaceClaim software. We Mesh the model with ANSYS Meshing software, and the element number equals 2.8 millions. Energy and species transport models were enabled to account for heat transfer and chemical reactions.

Price: $10

In this project, the flow inside a coil is modeled using ANSYS Fluent software. The geometry was created in Design Modeler, and a mesh consisting of 4,824,847 elements was generated using ANSYS Meshing. In this project we are going to find the outlet temperature and calculate the static pressure and static temperature throughout the domain.

Price: $30

In this project, the electrical current caused by the electrical potential is modeled using ANSYS Fluent. Also, the magnetic field created by the electrical current and its body force is simulated. Three User-Defined Scalars (UDS) are added for calculating the electrical and magnetic properties, and five User-Defined Functions (UDF) are used for the computation of the magnetic equations' source terms, heat release from the electric field, and momentum body forces. The geometry was created in SpaceClaim, and a mesh consisting of 463,701 elements was generated using ANSYS Meshing. The improvement of the flow field in terms of separation on an airfoil NACA 0012 was investigated by using plasma at two velocities and angles of attack.

Price: $28

In this project, the combustion of methane in a gas stove was modeled using ANSYS Fluent. Methane mechanism was chosen for reaction mechanism and eddy dissipation model used for turbulence-chemistry. The geometry was created in Design Modeler, and a mesh consisting of 5,533,297 elements was generated using Fluent Meshing.