Dynamic Mesh Online Courses

Price: $330

This product numerically simulates a Bent Pipe deformation using ANSYS Fluent software. This project is implemented as a Thermal Fluid-Structure Interaction (FSI) approach. We design the 3-D model in the Design Modeler software and mesh it in the ANSYS Meshing software. We use the Structure Model to consider the computation between the fluid and the structure. We use the Linear Elasticity method to define the solid deformation. We use the Dynamic Mesh tool to account for fluid domain deformation. The run calculation is in an Unsteady State (transient).

Price: $159

Master the FSI process with our “Fluid-Structure Interaction (FSI): All Levels” CFD course using ANSYS Fluent. From basics to advanced, learn to perform procedures of FSI simulation by two approaches: System Coupling in ANSYS Workbench and Structure Model (Intrinsic FSI) in ANSYS Fluent. This course equips you with the essential skills to model the simultaneous interaction of fluid and solid in all engineering fields using CFD. Ideal for beginners and experts alike, enhance your capabilities in FSI analysis for cutting-edge research and industrial applications.

Price: Free

Introduction to the Fluid-Structure Interaction (Intrinsic FSI) in ANSYS Fluent software Introduction to the Structural Model Introduction to Linear Elasticity and Non-Linear Elasticity Introduction to One-Way FSI and Two-Way FSI Introduction to the Dynamic Structural System

Price: Free

Introduction to the Fluid-Structure Interaction (FSI) in ANSYS Workbench software Introduction to the Fluent solver Introduction to the Structural solver Introduction to System Coupling Introduction to One-Way FSI and Two-Way FSI

Price: $210

This product numerically simulates a Flap motion or deformation using ANSYS software. This project is implemented as a Fluid-Structure Interaction (FSI) approach. We perform the Fluid simulation in ANSYS Fluent and the Solid simulation in ANSYS Transient Structural. The System Coupling is used to define Data Transfer between fluid and structural calculations. We use a 2-Way FSI for data transfer in both from fluid to solid and from solid to fluid. We design the 3-D model in the Design Modeler software and mesh it in the ANSYS Meshing software. We use the Dynamic Mesh option to account for fluid domain deformation. The run calculation is in an Unsteady State (transient).

Price: $270

In the oscillating multiphase CFD study, the interaction of water and air inside a narrow rectangular channel is investigated using ANSYS Fluent. The geometry is created in ANSYS Design Modeler and meshed with a structured grid of 480,760 cells in ANSYS Meshing. The Volume of Fluid (VOF) method is applied for tracking the water and air interface, with water defined as the primary phase and air as the secondary phase. A dynamic mesh technique with smoothing and re-meshing options is enabled, along with a moving wall defined by a User-Defined Function (UDF).

Price: $108

In this project, a twin screw extruder is simulated using ANSYS Fluent to analyze the interaction of water and particles within the system. The flow rate of particles is nine times that of the continuous phase, and both the interactions within the particle phase and with the continuous phase are considered using a 4-way DEM module. The geometry is designed in ANSYS SpaceClaim, and an unstructured mesh is generated in ANSYS Meshing with dynamic adjustments at each time step. The k-epsilon turbulence model and DPM model are employed along with the DEM module to simulate interactions. This complex simulation, involving dynamic meshing and high computational demands, reveals insights into particle tracking and residence time as the extruder operates at 300 rpm with a 60-degree rotation scope.

Price: $27

In this project, the function of balloon pumping mechanism inside an aorta was simulated using ANSYS Fluent. The geometry was created in SpaceClaim, and a mesh consisting of 450,795 elements was generated using ANSYS Meshing. Deflection of heart valve and balloon is simulated by dynamic mesh and with the grid motion UDFs.

Price: $144

This study presents a detailed numerical investigation of cavitation phenomena in a gerotor pump using computational fluid dynamics (CFD) simulation The physical modeling incorporated a mixture model for multiphase flow A key aspect of the simulation was the implementation of dynamic mesh capabilities through User Defined Functions (UDFs)