Engineering Fields Online Courses

Here's every CFD online course related to Engineering Fields category.

898 Courses

Price: $12

The problem numerically simulates airflow in Jet Intake using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 389136.

Play

Price: $60

The problem numerically simulates the combustion of methane and air in a combustion chamber using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 384112. We use the Species Transport model to define a chemical reaction. We use the Discrete Ordinate (DO) to define the Radiation model.

Play

Price: $48

The problem numerically simulates the Catalytic Reactor using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 430586. We use the Eulerian Multi-Phase model to define three phases, including air, fuel and catalyst material.

Play

Price: $20

The problem numerically simulates the Helicopter using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 937677. We perform this simulation as unsteady (Transient). The Mesh Motion option is used to define the rotating motion of helicopter blades.

Play

Price: $20

In this project, hydraulic jump of water flow in a rectangular channel is analyzed.

Play

Price: Free

The problem numerically simulates the airflow over a ventilated air cavity using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 803616. We aim to study Drag force in this project.

Play

Price: Free

The problem numerically simulates the Flap Effect on the Trailing Edge of an Airfoil using ANSYS Fluent software. We design the 2-D model by the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 64731. We aim to study Drag and Lift forces in this project.

Play

Price: $16

In this project, steady air flow mixing with fuel is investigated in an engine manifold with 3 outlets, where only one outlet is open and the other 2 outlets are blocked.

Play

Price: $28

This project uses ANSYS Fluent to numerically simulate an H-type vertical axis wind turbine. The 3D model is built in Design Modeler. The model is meshed in ANSYS Meshing, with an element count of 1,546,624. The simulation is run as unsteady (transient). The Mesh Motion method is used to define the rotational movement.

Play

AI Assistant

Ask me anything about MR CFD

How can I help?

Ask away, I'll point you the right way.

What I can do on this page

AI can make mistakes. Check important answers.