Flow Regimes Online Courses
Here's every CFD online course related to Flow Regimes category.
Water-Cooled Photovoltaic Thermal (PVT) System using Nanofluid, Paper Numerical Validation
Intermediate, Advanced
Price: $360
The current CFD Analysis numerically Validates the Paper "Numerical investigation on using of nanofluid in a water-cooled photovoltaic thermal systems" via ANSYS Fluent software. We have designed and meshed the geometry using Design Modeler, producing structured cells. UDF in SOURCE Macro is used for the heat generation.
Steam Ejector with Gas Methane Fluid CFD simulation, ANSYS Fluent
Intermediate, Advanced
Price: $12
The problem numerically simulates a Steam Ejector with Gas Methane Fluid in ANSYS Fluent software. The 2D geometry of the model is created in Design Modeler software. The model is meshed in ANSYS Meshing creating 11,132 elements. We simulate the problem via Density-based solver to define Compressible flow.
Solid Fuel Ramjet Engine, SFRJ, CFD Simulation, ANSYS Fluent
Intermediate, Advanced
Price: $80
In this project, a solid fuel ramjet (SFRJ) engine has been numerically simulated by ANSYS Fluent software. We design the 2-D model by the Design Modeler software. We Mesh the model with ANSYS Meshing software. The mesh type is Structured, and the element number equals 35,224. We use the Species Transport model to define the combustion process.
Price: $499
In this project, we perform the numerical simulation of a PEM Fuel Cell Stack System using ANSYS Fluent software. We designed the geometry of the model in 3D using Design Modeler software. We meshed the model using ANSYS Meshing software, and 9,946,409 cells have been generated. We used the Fuel Cell and Electrolysis model and the PEMFC submodel to define the proton-exchange membrane fuel cell. We applied the Stack Management option to define multiple fuel cell units. The Species Transport model is automatically activated because of using the fuel cell model.
Price: $629
The problem numerically simulates Fuel Cell with Cooling System using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 4,984,882. We use the Fuel Cell and Electrolysis Model to define a fuel cell. We used the SOFC sub-model to define a solid oxide fuel cell. We used the Species model to define H2, O2, and H2O.
Thermoacoustic Analysis in Combustion Chamber CFD Simulation, ANSYS Fluent
Intermediate, Advanced
Price: $60
In this project, we have simulated the Thermoacoustics Analysis in Combustion Chamber using ANSYS Fluent software. Three-dimensional modeling was done using SpaceClaim software. The meshing of the model has been done using ANSYS Meshing software. The Non-Adiabatic Non-Premixed Combustion model models the combustion. The acoustic is modeled via the Broadband Noise Source model.
Price: $20
In this project, we have simulated the performance of a Porous Media Reactor Tube with the presence of catalyst using ANSYS Fluent software. Three-dimensional modeling was done using Design Modeler software. The meshing of the model has been done using ANSYS Meshing software and the element number equals 4,255,042 . To simulate the behavior of molten salt and reactor inlet flow, the multiphase VOF Eulerian model is utilized. The porous media model is employed to impact the flow inside the reactor. For the reactions, the species transport model with two reactions is used.
Vortex Tube CFD Simulation, ANSYS Fluent Training
Intermediate
Price: $30
This project numerically simulates the Vortex Tube using ANSYS Fluent software. The 3-D geometry is designed in Space Claim software. We used Fluent Meshing Software to generate mesh; the element number equals 497,635. Turbulent flow is modeled with the Spalart Almaras model. The solver is Density-Based and the Sutherland model is used for viscosity.
AK-47 Bullet CFD Simulation by ANSYS CFX, Training
Beginner, Intermediate, Advanced
Price: $120
The problem numerically simulates the AK-47 movement using ANSYS CFX software. The geometry is designed in a 3D model with the SpaceClaim software. We performed the mesh of the model with ANSYS Meshing software, and the element number equals 3,236,698. The High Speed (Compressible) Wall Heat Transfer Model option is enabled due to the compressibility of the air.