Gas & Petrochemical Online Courses

Price: $240

The problem numerically simulates Fluidized Bed Polymerization Reactor using ANSYS Fluent software. We design the 2-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 938174. We perform this simulation as unsteady (Transient). We perform the simulation according to a Reference Article and validate the results. We use the Eulerian Multi-Phase model to define the suspension of solid particles within a fluid flow like a fluidized bed.

Price: $20

The problem numerically simulates the Erosion in a 90-degree Knee using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 4319695. We use the Discrete Phase Model (DPM) to simulate the injection of solid particles in the pipeline. The Erosion mode is selected to consider the impact of particles on the body of the pipelines.

Price: $16

The present problem deals with the hydrodynamic simulation of a gas sweetening system using ANSYS Fluent software. The present model is designed in three dimensions using Design Modeler software. We carry out the model's meshing using ANSYS Meshing software. The element number is 2168649. A multiphase model of the VOF type has been used to define the two-phase of sour gas and an amine stream.

Price: $20

The present problem deals with the flow of water vapor as the primary fluid and the secondary fluid within a steam ejector by ANSYS Fluent software. We design the present 2-D model by the Design Modeler software. Meshing was performed by ANSYS Meshing software. The mesh type is structured, and the element number equals 51990. We have used a density-based solver due to the compressibility in this project.

Price: $48

This product is a gas cyclone device CFD simulation by ANSYS Fluent software. Due to the centrifugal force and heavier weight, particles separate from the gas stream and move downward due to gravitational force. Design Modeler software models the current 3-D geometry. ANSYS Meshing software grid the present model. The element number is 142499. the solid particles enter the cyclone interior from the top as the discrete phase, applying the Discrete Phase Model (DPM). We also define the discrete phase injection as the INERT of the cyclone inlet.