Heat Transfer Online Courses
Here's every CFD online course related to Heat Transfer category.
Side Supply Air Conditioning, Paper CFD Validation
Beginner, Intermediate
Price: $160
The problem numerically simulates Air Conditioning (Side Supply) using ANSYS Fluent software. This project is validated with a reference article. We design the 3-D model by the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 1027974. The Energy Equation is activated, and heat flux is applied to the walls as heat sources.
Radiant Floor Heating System, Paper CFD Validation
Intermediate
Price: $280
The problem numerically simulates Radiant Floor Heating System using ANSYS Fluent software. This project is validated with a reference article. We design the 3-D model by the Design Modeler software. We mesh the model with ICEM software, and the element number equals 640618. We use the Discrete Ordinates (DO) model to consider radiation heat transfer.
Conjugated Heat Transfer, Elliptical Finned Tube Heat Exchanger Vs. Circular Fin
Beginner, Intermediate
Price: $160
In this project, by investigating conjugated heat transfer, the effect of cross-sectional change (with the constant area) on the rate of improvement of heat flux passing through the circular and elliptical finned tube heat exchanger was compared.
Single Slope Solar Still, Paper Numerical Validation, ANSYS Fluent CFD Simulation Training
Intermediate, Advanced
Price: $520
The present problem simulates the surface evaporation process within a solar desalination system using ANSYS Fluent. We design the 2-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software. The mesh type is Structured, and the element number equals 8200. The present project is validated by a reference article. We perform this simulation as unsteady (Transient). We use the Mixture Multi-Phase model to define air, water and vapor. We used a UDF to define a mass transfer between water and vapor, based on surface evaporation.
Price: $24
The problem numerically simulates solar radiation at different hours using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 2054294. This study is performed based on the geographical characteristics of Baku (The capital of Azerbaijan) at 8 AM and 3 PM on June 21st. We perform this simulation as unsteady (Transient). We use Discrete Ordinate Radiation (DO) and Solar Ray Tracing to consider radiation heat transfer.
Price: $12
The problem numerically simulates the Towel Warmer using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software. The mesh type is Structured, and the element number equals 475344. The Energy Equation is activated to consider convective heat transfer from pipes.
Price: $16
The problem numerically simulates the heat transfer of water flow inside a microchannel heat sink using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. The mesh type is Structured, and the element number equals 1500000. The Energy Equation is activated to consider heat transfer.
Price: $360
The problem numerically simulates the Nanofluid optimum concentration and Heat Transfer enhancement using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 40000. This project is validated with a reference article. The Energy Equation is activated to consider heat transfer.
Solar Shading Double Glazing façade, Radiation
Intermediate
Price: $24
The present problem simulates the radiation of solar rays into the room's interior considering the effects of a wooden partition as a solar shading, and a double glazing glass of façade, using ANSYS Fluent software.