Porous Online Courses

Price: $360

The geometry represents the meat sample and surrounding air domain, discretized with a structured mesh of 58,800 elements to accurately capture heat and mass transfer gradients. The meat drying process was simulated using CFD to analyze heat and mass transfer during drying. The VOF model was applied to capture multiphase interactions between liquid water and vapor. The meat was modeled as a porous medium to represent internal moisture transport. Infrared heating and air convection were used as drying mechanisms under two operating cases. Results showed that higher heat flux and temperature enhanced drying efficiency and reduced moisture content.

Price: $140

This project simulates blood flow in a porous artery wall using CFD in ANSYS. The wall is modeled as a high-viscosity fluid to mimic porosity, with no actual flow through it. Geometry was simplified, meshed, and solved in Fluent under steady laminar conditions. The study includes validation, mesh independence, and analysis of velocity profiles.

Price: $96

This product presents Microchannel Heat Sink Optimization using ANSYS software. We model with the Design Modeler software; we mesh with ANSYS Meshing software. We use the Design Exploration tool to perform the optimization process. We use the Latin Hypercube Sampling Design in the Design of Experiment (DOE). We use the Genetic Aggregation and the Response Surface Methodology (RSM).

Price: $14

CFD project simulates airflow through an Air-Cooled Steam Condenser (ACSC) system using ANSYS Fluent software. geometry was modeled in ANSYS SpaceClaim and meshed using ANSYS Meshing with 5,534,281 elements. Two cases were analyzed: with and without windshields to study their effect on airflow and cooling performance. The simulation is pressure-based and uses the realizable k-epsilon turbulence model.

Price: $260

This report presents the simulation of a reactive multiphase system incorporating heterogeneous Fischer-Tropsch synthesis reactions in a porous medium An iron (Fe) catalyst catalyzes the reactions, and the reaction rates are determined using Arrhenius kinetics. The Eulerian multiphase model is employed to investigate the interaction between different phases A Lee mass transfer model is applied for the phase change of water between liquid and gaseous states. A 2D geometry was created using SpaceClaim and The domain was meshed in ANSYS Meshing, using a structured mesh with 105,000 structured elements.

Price: $24

This product numerically simulates the Steam Methane Reforming (SMR) using ANSYS Fluent software. We design the 3-D model using the Design Modeler software. We mesh the model with ANSYS Meshing software; the element numbers are 1651814. We use the Species Transport model to define the chemical reactions.

Price: $16

The geometry of geothermal was drawn at SpaceClaim. the model was imported into ANSYS Meshing for mesh generation This project employs CFD software to simulate a geothermal system and analyze fluid behavior. The fractured reservoir is a porous zone with porosity of 0.047.

Price: $80

The study investigates Evaporation-Condensation Process in a Porous Heat Exchanger using ANSYS Fluent. The geometry is created in ANSYS Design Modeler, with a mesh of 8,777,268 elements generated using ANSYS Meshing. The simulation employs a pressure-based transient solver with the k-epsilon turbulence model and Volume of Fluid (VOF) multiphase model. It conducts a time-dependent analysis with enabled condensation in mass transfer mechanisms to simulate phase change from vapor to liquid water. Also, the domain is considered to be porous.

Price: $100

This problem simulates Adhesion effect on a self-cleaning material (porous)using Ansys Fluent software. The 2-D geometry is designed in Design Modeler software. Ansys Meshing software is used to generate the mesh; the element number equals 105,000. In this project, the Hydrophilicity and hydrophobicity of surfaces is simulated using the VOF How the flow pattern near a hydrophobic surface and near a hydrophobic surface is well modeled in this project.