Session 3

We discovered in this session how to operate Fluent Meshing.  We examined every one since there are really several methods to start it.

 First of all, we became familiar with the Launcher options.  The Home tab lets you create the major settings.  The 3D or 2D choice, for instance, is available.  That means whether we will use a 2D or 3D model.  There is also a separate part for parallel processing where the core count is specified for both meshing and the solver.  Particularly with complicated models, this core count significantly influences the pace of operation.

 Another significant choice was "Double Precision," which was verified.  Because it employs a 64-bit representation of decimal integers, this option lets computations be done more precisely.  Though for complicated models it is quite crucial, it does need more RAM.

 We then discovered three techniques to start Fluent Meshing:
 First approach:
 Simply look up "FLUENT" in the Windows menu, choose the method, pick "Meshing," specify the launcher options, and press "Start."

 Second approach: We run Workbench.  Once the geometry is established, we pull the "Mesh" component from the toolbox and place it on the primary screen.  We then link the mesh component to the geometry component using a line.  The Fluent Meshing launcher launches by double-clicking on the mesh component; after configuring, we select "Start."

 Third approach: There is a quicker method as well.  We right-click on the geometry component and choose "Transfer Data to New...".  We then press "Fluid Meshing."  This method it generates a mesh component and links it to the geometry.  We double-click the technique, set the parameters, and begin.

 Though the second and third techniques are far more practical if you are operating in the Workbench, you may use whichever of these approaches is most convenient for you.