Free CFD Online Courses
Here's every free CFD simulation course that can give you a taste of what MR CFD has to offer.
Price: Free
The problem numerically simulates the Container Effect on Truck aerodynamics using ANSYS Fluent software. The 3-D geometry is designed in Solidworks and Design Modeler software. We used ANSYS Meshing to generate polyhedral mesh; the element number equals 663,127 and 1,095,371 for 'truck' and 'truck and container,' respectively. Turbulence is modeled with the k-w SST model.
Impinging Jet on a U-Shaped Plate, Heat Transfer, ANSYS Fluent Training
Beginner, Intermediate
Price: Free
In this simulation, the airflow hits the U-shaped wall in the form of an impinging jet to study the Nusselt number in different Reynolds numbers.
Price: Free
This project is going to study an incompressible isothermal airflow adjacent to the famous Ahmed body.
Price: Free
In this project, a golf ball is studied aerodynamically, at speed with lateral angle and zero degree angle of attack using ANSYS Fluent software.
Airflow Modeling over a Flying Bird, CFD Simulation
Beginner, Intermediate
Price: Free
Aerodynamic Engineering Aerodynamic Coefficients
Price: Free
The problem numerically simulates the Orifice for Methane Gas Flow using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We mesh the model with ANSYS Meshing software. The mesh type is Structured, and the element number equals 54648.
Price: Free
The problem numerically simulates the airflow over a ventilated air cavity using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 803616. We aim to study Drag force in this project.
Price: Free
The problem numerically simulates the Flap Effect on the Trailing Edge of an Airfoil using ANSYS Fluent software. We design the 2-D model by the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 64731. We aim to study Drag and Lift forces in this project.
Price: Free
The problem numerically simulates a Cylindrical Heat Source using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 1600000. We define an Energy Source to define the heat from the aluminum cylinder body.