CFD Beginner Courses
Here's every CFD online course in the Beginner level.
Water Infiltration into a Porous Concrete Block, ANSYS Fluent Simulation Training
Beginner, Intermediate
Price: $24
The problem numerically simulates Water infiltration into a porous concrete block using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number about 1million. We perform this simulation as unsteady (Transient). We use the Porous medium to study water infiltration into a porous concrete block. We use the VOF Multi-Phase model to define two-phase flow inside a concrete block.
Price: $8
In this project, the heat transfer fluid flow inside the shell and tube heat exchanger with fins on the flat shell as vortex generators was simulated by ANSYS Fluent software.
Pulsatile Blood Flow in Arterial Bifurcation Simulation, ANSYS Fluent Training
Beginner, Intermediate
Price: $24
The problem numerically simulates the Pulsatile Blood Flow in Arterial Bifurcation using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 168367. We perform this simulation as unsteady (Transient). We use a UDF to define pulsatile velocity as a sinus function.
Price: $12
The problem numerically simulates airflow in Jet Intake using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 389136.
Hydraulic Jump of Water in Rectangular Channel, ANSYS Fluent Training
Beginner, Intermediate
Price: $20
In this project, hydraulic jump of water flow in a rectangular channel is analyzed.
Price: Free
The problem numerically simulates the airflow over a ventilated air cavity using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 803616. We aim to study Drag force in this project.
Price: Free
The problem numerically simulates the Flap Effect on the Trailing Edge of an Airfoil using ANSYS Fluent software. We design the 2-D model by the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 64731. We aim to study Drag and Lift forces in this project.
Manifold of Engine CFD Simulation by Species Transport
Beginner, Intermediate
Price: $16
In this project, steady air flow mixing with fuel is investigated in an engine manifold with 3 outlets, where only one outlet is open and the other 2 outlets are blocked.
H-Type Vertical Axis Wind Turbine (VAWT): Mesh Motion
Beginner, Intermediate, Advanced
Price: $28
This project uses ANSYS Fluent to numerically simulate an H-type vertical axis wind turbine. The 3D model is built in Design Modeler. The model is meshed in ANSYS Meshing, with an element count of 1,546,624. The simulation is run as unsteady (transient). The Mesh Motion method is used to define the rotational movement.