CFD Intermediate Courses

Price: $20

In this project, the explosion of TNT, with all its complexities, was modeled using ANSYS Fluent. Explosion starts with a fast decomposition reaction that increase the temperature and pressure suddenly that follow by a series of pressure waves. The geometry was created in SpaceClaim, and a mesh consisting of 2,673,750. elements was generated using ANSYS Meshing. The animation of pressure in domain presented and compression wave speed is calculated.

Price: $16

This project numerically simulates the Bubble Trap using ANSYS Fluent software. The 2-D geometry is designed in Spaceclaim software. We used ANSYS Meshing Software to generate mesh; the element number equals 32,000 . The multiphase VoF model simulates the two-phase flow of water and air.

Price: $16

The present problem simulates a Six Blade Stirring Mixer using ANSYS Fluent software. We have designed the geometry using DesignModeler software and created the mesh on this geometry using ANSYS Meshing software. The mesh type is unstructured with 5,447,852 cells. The Mixture multiphase model has been used to simulate the present model. The Multiple Reference Frames (MRF) model is used to simulate the motion of impeller. The solution is steady, and the k-Ꜫ model is chosen to simulate the turbulence of the flow.

Price: $72

The problem numerically simulates Arterial Stent using ANSYS Fluent software. We design the 3-D model by the Spaceclaim software. We Mesh the model by ANSYS Meshing software, and the element number equals 220,000 and 250,000 for the Stenosis and stented artery respectively . We use a UDF to define pulsatile blood flow. The Eulerian multiphase model was enabled to distinguish between the blood and arterial wall interfaces.

Price: $140

The problem numerically simulates Evaluation of NO and Soot Emissions from Wood Gas Flare using ANSYS Fluent software. We design the 3-D model with the SpaceClaim software. We Mesh the model with ANSYS Meshing software, and the element number equals 2.8 millions. Energy and species transport models were enabled to account for heat transfer and chemical reactions.

Price: $10

In this project, the flow inside a coil is modeled using ANSYS Fluent software. The geometry was created in Design Modeler, and a mesh consisting of 4,824,847 elements was generated using ANSYS Meshing. In this project we are going to find the outlet temperature and calculate the static pressure and static temperature throughout the domain.

Price: $6

In this project, the flow around a projectile is modeled using ANSYS Fluent. The geometry was created in SpaceClaim, and a mesh consisting of 2,871,393 elements was generated using ANSYS Meshing. In this project we are going to find the center of pressure and calculate the lift force on the projectile .

Price: $30

In this project, the electrical current caused by the electrical potential is modeled using ANSYS Fluent. Also, the magnetic field created by the electrical current and its body force is simulated. Three User-Defined Scalars (UDS) are added for calculating the electrical and magnetic properties, and five User-Defined Functions (UDF) are used for the computation of the magnetic equations' source terms, heat release from the electric field, and momentum body forces. The geometry was created in SpaceClaim, and a mesh consisting of 463,701 elements was generated using ANSYS Meshing. The improvement of the flow field in terms of separation on an airfoil NACA 0012 was investigated by using plasma at two velocities and angles of attack.

Price: $30

In this project, we aim to simulate heat transfer inside a minichannel with Al2O3 nanoparticles. The geometry is designed using Spaceclaim software then meshed in ANSYS Meshing with 2,850,000 hexagonal elements. Mixture model is used to simulate the presence of nanoparticles as second phase.