CFD Intermediate Courses

Price: $15

This project simulates the Fluid-Structure Interaction (FSI) of a high-speed airfoil using ANSYS Fluent software. The airfoil geometry is designed in ANSYS Design Modeler. ANSYS Meshing is used to generate a high-quality mesh with 2,398,833 elements. In this study, the complex flow behavior and structural response of the airfoil are simulated using a pressure-based transient solver and the Realizable k-epsilon turbulence model. The pressure distribution, velocity patterns, and airfoil displacement under high-speed conditions are well modeled in this project.

Price: $28

The problem numerically simulates one-step non-premixed hydrogen combustion with integration of the Sutherland viscosity and kinetic theory of thermal conductivity using ANSYS Fluent software. We design the 3-D model with the Spaceclaim software. We mesh the model with ANSYS Meshing software. The mesh type is Structured We use the Species Transport model to define a Combustion reaction. The combination of Sutherland viscosity and kinetic theory for thermal conductivity is presented for the accurate simulation of the combustion process. The standard k-e turbulence model is used to simulate the turbulence.

Price: $219

This study aims to investigate the aerodynamic performance of a Grumman RQ-4 Global Hawk using ANSYS Fluent. The Global Hawk geometry was modelled using SpaceClaim then imported into ANSYS Fluent for meshing consisting 3,764,695 elements. The simulation used a pressure-based solver.

Price: $10

The problem numerically simulates multiphase flow in a venturi nozzle using ANSYS Fluent software. The geometry is designed in ANSYS Design Modeler and ANSYS Meshing is used to generate a mesh with 829,367 cells. The Volume of Fluid (VOF) multiphase model is employed to handle the interaction between air and water phases. The Realizable k-epsilon turbulence model with Enhanced Wall Treatment is used to simulate turbulent flow. Results are analyzed for air volume fraction, pressure distribution, and velocity patterns throughout the venturi turbine geometry.

Price: $14

This study investigates the effects of energy dissipation blocks on the energy dissipation efficiency of stepped spillways using computational fluid dynamics (CFD) simulations. Two spillway configurations, with and without blocks, were analyzed under different flow conditions. The results showed that the presence of blocks enhanced energy dissipation by 6% compared to the conventional stepped spillway design. These findings contribute to the optimization of stepped spillway designs for improved energy dissipation and downstream channel protection.

Price: $12

The problem numerically simulates CO2 plume dynamics in a seabed environment using ANSYS Fluent software. The 2-D geometry is designed in ANSYS Design Modeler and ANSYS Meshing is used to generate a structured mesh with 306,278 elements. The Eulerian multiphase model is employed to handle the interaction between different phases. Results are analyzed , including CO2 distribution, pressure fields, and velocity patterns.

Price: $18

This project aims to evaluate the impact of tube geometry and nanofluid composition on heat transfer performance. Three nanofluid compositions are examined: Alumina/water, MWCNT/water, and a hybrid Alumina-MWCNT/water nanofluid. It explores two geometric configurations: circular and diamond-shaped tubes' effect on heat transfer performance. The turbulence of the flow is simulated by Realizable k-epsilon model. The single phase model is considered to simulate nanoparticle presence in the base fluid.

Price: $12

This study numerically simulates the heat transfer and fluid dynamics in a packed bed reactor with radiative quartz spheres using ANSYS Fluent software. The 3-D model is designed using ANSYS Design Modeler and meshed with ANSYS Meshing software, resulting in approximately 4 million polyhedral elements. The simulation employs the RNG k-ε turbulence model with standard wall functions, and the Discrete Ordinate (DO) radiation model to capture temperature variations accurately. The energy equation is enabled to track temperature distribution, and the solver is pressure-based with steady-state conditions. The study aims to provide insights into optimizing packed bed reactor designs for various industrial applications.

Price: $64

This study simulates powder distribution in a stationary fluid after mixing using ANSYS Fluent. The geometry, representing a mixer tank with a rotating propeller, is designed in ANSYS SpaceClaim and meshed using ANSYS Meshing, resulting in about 3,000,000 cells. The simulation is conducted as a transient analysis for a limited time period. The Eulerian multiphase model is employed, with the granular option activated for the powder phase. Mesh motion is enabled to model the propeller rotation at 30 rpm.