CFD Intermediate Courses
Here's every CFD online course in the Intermediate level.
Methane Combustion in a Gas Stove CFD Simulation, ANSYS Fluent
Beginner, Intermediate
Price: $28
In this project, the combustion of methane in a gas stove was modeled using ANSYS Fluent. Methane mechanism was chosen for reaction mechanism and eddy dissipation model used for turbulence-chemistry. The geometry was created in Design Modeler, and a mesh consisting of 5,533,297 elements was generated using Fluent Meshing.
Price: $64
This project simulates an Archimedes Spiral Wind Turbine in ANSYS Fluent software. The geometry is designed in Solid works then meshed in ANSYS Meshing with 3,207,809 unstructured cells. The rotation of the blade is simulated via Mesh Motion. The turbulence of the air flow is modeled with SST k-w model.
Centrifugal Blower (Mesh Motion) CFD Simulation, ANSYS Fluent
Beginner, Intermediate
Price: $10
The problem numerically simulates Centrifugal Blower using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 5,479,874 . We use the Mesh Motion method to define rotational motion in cell zone conditions.
Electrolysis CFD Simulation Concepts in ANSYS Fluent
Beginner, Intermediate, Advanced
Price: Free
Introduction to the Electrolysis models in ANSYS Fluent software Introduction to the "Fuel Cell and Electrolysis" model ("Electrolysis" sub-models) Introduction to the "Potential/Electrochemistry" model ("PEM Electrolysis" and "Alkaline Electrolysis" sub-models) Introduction to the construction of the electrolyzer and its components Introduction to the electrochemistry concepts and electrochemical reactions Introduction to the governing equations of the electrolysis process
Immersion Cooling Effect on a Heat sink Performance CFD Simulation
Beginner, Intermediate
Price: $6
This project simulates the effect of immersion cooling on heat sinks' performance in ANSYS Fluent software. The 3D model is designed using the Spaceclaim, then meshed using ANSYS Meshing producing 85,000 cells. The k-epsilon RNG turbulence model is employed to accurately predict flow patterns.
Shock Tube CFD Simulation, ANSYS Fluent
Intermediate
Price: $10
In this project, moving shock and expansion waves in a shock tube were simulated using ANSYS Fluent. The interactions of shock and expansion waves, as well as the reflection of waves at the end wall, were investigated, and the x-t wave diagram for the modeled shock tube was plotted. The geometry was created in SpaceClaim, and a mesh consisting of 300,000 elements was generated using ANSYS Meshing. The turbulence model is defined as Inviscid.
Price: $200
In this project, the combustion of kerosene in a model gas turbine combustor, with all its complexities, was modeled using ANSYS Fluent. Soot formation in the combustion process was modeled with the Moss-Brooks model by selecting "C2H2" and "C2H4" species as precursors for surface growth, and the Lee model for oxidation. The geometry was created in SpaceClaim, and a mesh consisting of 51,427 elements was generated using ANSYS Meshing. The rates of nucleation, surface growth, coagulation, and oxidation, as well as the soot mass fraction and temperature in the combustor, were investigated in this study.
Price: $64
In this project, a Gorlov vertical axis wind turbine is simulated using ANSYS Fluent software. The geometry is re-designed in ANSYS Spaceclaim software and meshed in ANSYS Meshing software. The angular motion is simulated using the sliding mesh (mesh motion) model.
Price: $8
In this project, air-water mixing improvement using rings is simulated by ANSYS Fluent software. The geometry is designed in Design Modeler then meshed in ANSYS Meshing generating 6,342,465 cells. VoF model is activated to simulate mixing the two phases. The turbulence of the flow is simulated by Standard k-e model.