Price: $119

Advance your mass transfer CFD skills with this 10-project ANSYS Fluent training package — covering boiling and condensation phase change, cavitation in rotating equipment, droplet and spray mass transfer, and applied evaporation and drying.

Price: $420

Investigates transient thermal behavior and multiphase flow dynamics within a solar still system. Features a multi-layered domain modeled in SpaceClaim and discretized with 3.3 million tetrahedral elements. Utilizes ANSYS Fluent's transient Eulerian multiphase solver, UDF-based phase change, and discrete ordinates radiation. Accurately captures temporal temperature gradients, paraffin wax melting fractions, and water vaporization dynamics.

Price: $109

Build intermediate-level expertise in mass transfer CFD with this 10-project ANSYS Fluent training package — covering fundamental boiling and evaporation, cavitation phenomena, and desalination and water treatment systems driven by phase change and species diffusion.

Price: $39

Mass Transfer: Beginner CFD Training Package is a ten-project introduction to mass-transfer and phase-change simulation in ANSYS Fluent. Starting from evaporation and condensation and building through boiling, cavitation, flashing, drying, droplet dispersion, and hydrate formation, it gives newcomers a hands-on, application-driven foundation in the CFD techniques behind modern phase-change and mass-transfer engineering — one real engineering case at a time.

Price: $220

This product numerically simulates the Cavitation in a Pelton Turbine using ANSYS Fluent software. We design the 3D model with Design Modeler software. We mesh the model with ANSYS Meshing software. We use the Volume of Fluid (VOF) Multi-Phase Model to define a two-phase flow. We use the Mass Transfer mechanism to define Cavitation. We use the Mesh Motion to define a rotational flow.

Price: $140

The projectile cavitation study investigates the formation and development of a vapor cavity around a projectile 3D transient CFD of a projectile moving obliquely in water using ANSYS Fluent, with mixture cavitation and realizable Two inlet velocities (10 and 20 m/s) are applied to study cavitation inception and development. At 10 m/s the vapor cavity forms only locally and collapses quickly, so cavitation disappears. At 20 m/s a large, stable cavity develops around the projectile and extends into the wake.

Price: $28

2D Ammonia Flashing Simulation. VOF model with three phases (Air, Ammonia liquid and Ammonia Vapor). Lee Model for Evaporation of Ammonia.

Price: $120

A 2D symmetric geometry with a structured mesh of 310,000 cells was created, refined near the projectile walls for accuracy. This project investigates the cavitation phenomenon caused by a projectile moving through water using ANSYS Fluent. A transient, pressure-based solver with the Volume of Fluid (VOF) model captures the phase interaction between liquid and vapor. The simulation analyzes velocity, pressure, and vapor volume fraction around the projectile.

Price: $360

The geometry represents the meat sample and surrounding air domain, discretized with a structured mesh of 58,800 elements to accurately capture heat and mass transfer gradients. The meat drying process was simulated using CFD to analyze heat and mass transfer during drying. The VOF model was applied to capture multiphase interactions between liquid water and vapor. The meat was modeled as a porous medium to represent internal moisture transport. Infrared heating and air convection were used as drying mechanisms under two operating cases. Results showed that higher heat flux and temperature enhanced drying efficiency and reduced moisture content.