Price: $14

The study investigates cavitation in water flow around a triangular obstacle using ANSYS Fluent CFD simulation. The geometry is created in ANSYS Design Modeler, with a mesh of 310,000 structured elements generated using ANSYS Meshing. The simulation employs a pressure-based transient solver with the k-epsilon turbulence model and Volume of Fluid (VOF) multiphase model. ANSYS Fluent conducts a time-dependent analysis with enabled cavitation in mass transfer mechanisms to simulate phase change from liquid water to vapor.

Price: $240

This study investigates bubble dynamics in a 2D boiling chamber using CFD analysis in ANSYS Fluent. The 2D geometry was created in ANSYS Design Modeler and meshed using ANSYS Meshing, resulting in a structured mesh. The simulation utilizes the Volume of Fluid (VOF) multiphase model coupled with an evaporation-condensation model for phase change. A User-Defined Function (UDF) initializes a sinusoidal air layer at the chamber bottom. The transient simulation examines bubble formation, growth, rise, and detachment over multiple time steps, visualized through volume fraction contours.

Price: $64

The problem numerically simulates a Pool Boiling unsteadily using ANSYS Fluent software. We design the model in Spaceclaim and then meshed it with ANSYS Meshing software generating 92,151 cells. The multi-phase Eulerian method is used for simulating the liquid phase of water and the vapor phase of bubbles The k-ɛ realizable model is performed to simulate turbulent behavior of the bubble.

Price: $240

The problem numerically simulates the evaporation and condensation using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software; the element number equals 1,574,100. We use the VOF Multiphase model to define water, liquid, and vapor. We define a Mass Transfer between water liquid and water vapor. We use the User-Defined Function (UDF) to define a mass transfer (evaporation and condensation). We use the Mass-Transfer Macro for UDF.

Price: Free

VOF applications & applicability VOF general settings Implicit vs. Explicit formulations Available discretization methods Body force formulation Open channel BC Interface modeling Level set method Surface tension modeling Mass transfer mechanisms

Price: $40

This tutorial simulates cavitation on a boat propeller using ANSYS Fluent. It applies the Mixture multiphase model with the Schnerr-Sauer cavitation model and mesh motion for the rotating propeller, and examines how pressure distribution and rotational speed drive vapor formation on the blades.

Price: $48

This project investigates the saturated water pool boiling inside a cylindrical chamber.

Price: $36

The problem numerically simulates the Sub-Oceanic Volcanic Activity using ANSYS Fluent software. We design the 2-D model by the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 42,751. We perform this simulation as unsteady (Transient). The multiphase VOF model is used to model the three phases of air, water and vapor. Evaporation and condensation is used for mass transfer mechanism.

Price: $72

The problem numerically simulates the Water Spraying using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. We use the discrete phase model (DPM) to define a Spray process. The Species Transport is defined to select Evaporative Droplet injection for particles. Breakup & Coalescence are considered.