Price: $360

This project aimed to simulate the performance of a heat pump dryer designed for drying wet wood volatiles. The Volume of Fluid (VOF) method was employed to capture the interaction between air and liquid water phases. Species Transport Model was activated to simulate the mass transfer associated with water evaporation. A User-Defined Function (UDF) was developed to represent the evaporation process accurately.

Price: $144

This study presents a detailed numerical investigation of cavitation phenomena in a gerotor pump using computational fluid dynamics (CFD) simulation The physical modeling incorporated a mixture model for multiphase flow A key aspect of the simulation was the implementation of dynamic mesh capabilities through User Defined Functions (UDFs)

Price: $200

In this comprehensive study, three distinct cases were investigated to analyze the effectiveness of spray cooling approaches utilizing ANSYS Fluent software. The simulation setup began with the creation of detailed geometry using SpaceClaim, followed by the generation of a high-quality quadrilateral mesh in ANSYS Meshing. Three simulation cases were compared: baseline airflow only (Case 1), water injection with inert particles (Case 2), and water injection with droplet interactions and phase change A two-way coupling approach was employed in the DPM configurations to capture the complete interaction between the discrete phase and the continuous flow field.

Price: $200

The computational fluid dynamics (CFD) analysis of a Francis turbine was conducted using ANSYS Fluent software to investigate its performance characteristics and flow behavior. This study aims to provide detailed insights into the pressure distribution, velocity patterns, and potential cavitation phenomena within the turbine system. The simulation incorporates advanced numerical models and careful consideration of boundary conditions to ensure accurate results.

Price: $20

The project utilized the ANSYS software suite to simulate and analyze the fluid behavior and cavitation characteristics under specific operating conditions. The initial phase of the project involved geometry creation using ANSYS Design Modeler, followed by mesh generation in ANSYS Meshing. The multiphase modeling approach utilized the Volume of Fluid (VOF) method, coupled with cavitation mechanisms to accurately represent the two-phase flow dynamics

Price: $28

In this project, the evaporation of soil moisture in a fluidized bed was simulated using ANSYS Fluent. The geometry was created in SpaceClaim, and a mesh consisting of 22,000 elements was generated using ANSYS Meshing. The Eulerian model was chosen to simulate multiphase flow, and the species transport model was used to define the mixture in each phase. Evaporation was modeled using the evaporation-condensation method based on the Lee

Price: $32

This study extends the previous simulation of the VA-111 Shkval rocket using ANSYS Fluent software by incorporating mass transfer to capture the cavitation effects The geometry is designed in SpaceClaim, and the meshing is performed using Fluent Meshing; the element number equals 257,000 polyhedral cells. The simulation uses the Pressure-based and VOF Multiphase model to define a two-phase flow To capture the cavitation effects, the Zwart-Gerber-BelAmri model is enabled

Price: $12

This study presents a CFD analysis of a Multi-point Liquid Distributor for packed columns using ANSYS Fluent. We designed the 3-D symmetry model using the ANSYS Design Modeler We mesh the model with ANSYS Meshing software, and the element number equals 783,039. The Volume of Fluid (VOF) model was utilized to simulate the multiphase flow of water and air. A steady-state, pressure-based solver was employed for the simulation.

Price: $80

The study investigates Evaporation-Condensation Process in a Porous Heat Exchanger using ANSYS Fluent. The geometry is created in ANSYS Design Modeler, with a mesh of 8,777,268 elements generated using ANSYS Meshing. The simulation employs a pressure-based transient solver with the k-epsilon turbulence model and Volume of Fluid (VOF) multiphase model. It conducts a time-dependent analysis with enabled condensation in mass transfer mechanisms to simulate phase change from vapor to liquid water. Also, the domain is considered to be porous.