MR CFD’s All Courses
Here's every Course from Basic to Advanced, that can boost your skills and career.
Stall Investigation Over a Wing, ANSYS Fluent CFD Simulation Training
Beginner, Intermediate
Price: $220
The problem numerically simulates the Stall phenomenon over a Wing using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software. The air is assumed to be incompressible.
Price: $100
The problem numerically simulates Spoiler Modes Comparison for F1 Car Aerodynamics using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the polyhedral element number equals 450000. We aim to compare the open and close modes of the spoiler and observe the difference between the lift and drag forces.
Wind Turbine Considering Turbine Base 3-D Simulation
Intermediate
Price: $160
The problem numerically simulates a horizontal axis wind turbine using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 1981472. We use the Frame Motion (MRF) to define a rotational movement.
Price: $80
The problem numerically simulates the Venturi Flow in a Tube for Air Suction using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ICEM software. The mesh type is Structured, and the element number equals 193932. The simulation is dependent on time so is performed in a transient form. We use the VOF Multiphase model to define a two-phase flow.
Impinging Jet on a U-Shaped Plate, Heat Transfer, ANSYS Fluent Training
Beginner, Intermediate
Price: Free
In this simulation, the airflow hits the U-shaped wall in the form of an impinging jet to study the Nusselt number in different Reynolds numbers.
Combustion Chamber Performance Optimization: DOE Applying CCD
Intermediate, Advanced
Price: $27
In this project, combustion chamber performance is optimized using DOE and RSM.
Aircraft Propeller CFD Simulation Using Mesh Motion, ANSYS Fluent Training
Beginner, Intermediate
Price: $20
The problem numerically simulates the Aircraft Propeller using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 692023 and 3812519. We perform this simulation as unsteady (Transient). We use the Mesh Motion model to define the rotational movement. We study aerodynamic forces, including drag and lift.
Price: Free
This project is going to study an incompressible isothermal airflow adjacent to the famous Ahmed body.
Ammonia Absorption into Water in a Packed Tower, VOF
Intermediate, Advanced
Price: $20
The problem numerically simulates the Absorption of Ammonia into Water in Packed Tower using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We Mesh the model with ANSYS Meshing software, and the element number equals 478882. We use the VOF Multi-phase model to define two phases, including ammonia and water liquid.