MR CFD’s All Courses
Here's every Course from Basic to Advanced, that can boost your skills and career.
Single Slope Solar Still, Paper Numerical Validation, ANSYS Fluent CFD Simulation Training
Intermediate, Advanced
Price: $520
The present problem simulates the surface evaporation process within a solar desalination system using ANSYS Fluent. We design the 2-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software. The mesh type is Structured, and the element number equals 8200. The present project is validated by a reference article. We perform this simulation as unsteady (Transient). We use the Mixture Multi-Phase model to define air, water and vapor. We used a UDF to define a mass transfer between water and vapor, based on surface evaporation.
Price: $30
In this study, using the DPM (Discrete phase material) method, the effect of impurities in the working fluid on the splitter erosion was investigated.
Price: $21
The present problem simulates the movement of a submarine robot inside a canal containing water flow using ANSYS Fluent software.
Price: $28
The problem simulates a two-phase flow (water and air) inside an open channel with a 180-degree arc using ANSYS Fluent software.
Price: $24
The problem numerically simulates solar radiation at different hours using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 2054294. This study is performed based on the geographical characteristics of Baku (The capital of Azerbaijan) at 8 AM and 3 PM on June 21st. We perform this simulation as unsteady (Transient). We use Discrete Ordinate Radiation (DO) and Solar Ray Tracing to consider radiation heat transfer.
Price: $12
The problem numerically simulates the Towel Warmer using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software. The mesh type is Structured, and the element number equals 475344. The Energy Equation is activated to consider convective heat transfer from pipes.
Price: $16
The problem numerically simulates the heat transfer of water flow inside a microchannel heat sink using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software. The mesh type is Structured, and the element number equals 1500000. The Energy Equation is activated to consider heat transfer.
Price: $360
The problem numerically simulates the Nanofluid optimum concentration and Heat Transfer enhancement using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 40000. This project is validated with a reference article. The Energy Equation is activated to consider heat transfer.
Price: $140
In this research, using species transport module, the gases from combustion in the car engine and their interaction with the open air in the urban environment were investigated statically and in traffic mode.