MR CFD’s All Courses
Here's every Course from Basic to Advanced, that can boost your skills and career.
Shuffle Parking Ventilation CFD Simulation Training
Intermediate
Price: $240
The present problem simulates the air conditioning inside the shuffle car park using ANSYS Fluent software.
Price: $240
The problem numerically simulates the ventilation inside the car park using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 960365. We perform this simulation as unsteady (Transient). We use the Species Transport model to define different gases, including air and CO. We use a UDF to define the mass flow rate of pollutant gas from car exhaust.
Price: $219
In this study, the effect of different altitudes of a high-speed drone has been studied using ANSYS Fluent software.
Side Supply Air Conditioning, Paper CFD Validation
Beginner, Intermediate
Price: $160
The problem numerically simulates Air Conditioning (Side Supply) using ANSYS Fluent software. This project is validated with a reference article. We design the 3-D model by the Design Modeler software. We mesh the model with ANSYS Meshing software, and the element number equals 1027974. The Energy Equation is activated, and heat flux is applied to the walls as heat sources.
Radiant Floor Heating System, Paper CFD Validation
Intermediate
Price: $280
The problem numerically simulates Radiant Floor Heating System using ANSYS Fluent software. This project is validated with a reference article. We design the 3-D model by the Design Modeler software. We mesh the model with ICEM software, and the element number equals 640618. We use the Discrete Ordinates (DO) model to consider radiation heat transfer.
Aorta, Non-Newtonian pulsating blood flow
Intermediate
Price: $42
The problem numerically simulates a non-Newtonian pulsating blood flow in Aorta using ANSYS Fluent software. We design the 3-D model with the Design Modeler software. We mesh the model with ICEM software, and the element number equals 457864. We perform this simulation as unsteady (Transient). We use a UDF to define the pulsating inlet velocity to Aorta. We use the Carreau model to define a non-Newtonian fluid.
Price: $360
The problem numerically simulates Population Balance Model (PBM) for Nucleation using ANSYS Fluent software. We design the 3-D model by the Design Modeler software. We Mesh the model by ANSYS Meshing software, and the element number equals 112077. We use the Species Transport model to define a mixture of water, calcium, and oxalate as the initial phase. We use the Eulerian Multiphase model to define a two-phase flow, in which the secondary phase is calcium-oxalate, resulting from a chemical reaction. We use The population balance model (PBM) to study produced particles' behavior and predict the density or population of particles in specific sizes. We use a UDF function to define the nucleation and growth rates in PBM analysis.
Conjugated Heat Transfer, Elliptical Finned Tube Heat Exchanger Vs. Circular Fin
Beginner, Intermediate
Price: $160
In this project, by investigating conjugated heat transfer, the effect of cross-sectional change (with the constant area) on the rate of improvement of heat flux passing through the circular and elliptical finned tube heat exchanger was compared.
Accumulation of Particles in Elbow Bend by DDPM
Intermediate, Advanced
Price: $210
The problem numerically simulates a simple elbow bend using ANSYS Fluent software. We design the 3-D model with CAD software. We mesh the model with ANSYS Meshing software. The mesh type is Structured, and the element number equals 150624. This project is performed in an unsteady state (transient). We use the DDPM (Dense-Discrete-Phase-Method) in this project.